Denso QK20-R User Manual page 80

Items
Reading EAN-8
EAN-8 transmission of check digit
EAN-8 Conversion to the EAN-13 format
Reading UPC/EAN with 2-digit add-on
Reading UPC/EAN with 5-digit add-on
Reading UPC/EAN with add-on only
Add-on check level
Interleaved 2of5
Items
Reading Interleaved 2of5
Minimum number of readable digits for
Interleaved 2of5
Maximum number of readable digits for
Interleaved 2of5
Codabar (NW-7)
Items
Reading Codabar (NW-7)
Minimum number of readable digits for
Codabar (NW-7)
Maximum number of readable digits for
Codabar (NW-7)
(Note 1) The parameter setting ranges are different from the numbers of digits that the scanner can actually read.
Parameters
Enable
Disable
Enable
Disable
Enable
Disable
Enable
Disable
Enable
Disable
Enable
Disable
Disable checking
Levels 1 to 4
Parameters
Enable, without a check digit
Enable, with a check digit
(Check digit transmission enabled)
Enable, with a check digit
(Check digit transmission disabled)
Disable
2 to 99 digits
Parameters
Enable, without a check digit
Enable, with a check digit
(Check digit transmission enabled)
Enable, with a check digit
(Check digit transmission disabled)
Disable
3 to 99 digits
(including start/stop codes)
69
Defaults
√
√
√
√
√
√
√
Defaults
√
4 digits
99 digits
Defaults
√
4 digits
99 digits
: Can be changed only with the configuration software.
Refer to:
Sections 9.4 and
11.3
Refer to:
Section 11.3
(See Note 1.)
Refer to:
Section 11.3
(See Note 1.)