(11) Trigger switch control
Items
Reading mode
Error issue when reading fails
Sensibility level
(12) Other settings
Items
Illumination LEDs
Switching of scanning target
Restriction on the use of QR-coded
parameter menu
(Note 1)
(Note 1) Can be changed with the configuration software (ScannerSetting_2D) only.
Changing any other parameter with the configuration software automatically disables the "Restriction on the use of
QR-coded parameter menu."
Parameters
Continuous reading mode 1
Continuous reading mode 2
Auto sensing mode
Enable
Disable
High
Medium
Low
Parameters
Always turns off
Automatically controls on/off
Always turns on
LCD and paper
Paper
Enable
Disable
73
Defaults
√
√
√
Defaults
√
√
√
: Can be changed only with the configuration software.
Refer to:
Section 6.1
Section 6.2
Section 6.1
Section 6.2
Refer to:
Section 8.3
Appendix 2
Section 11.2