Firmware Update - Encore ENXDVR-4C User Manual

Firmware Update

The firmware is updated by using USB pen drive that contains the latest firmware
file.
Attach the external USB disk into the USB port on DVR front panel.
NOTE
Once the USB device is connected to the port, the DVR will take a few seconds to
search for the firmware.
If there is a mistake or missing file on the drive, it will show: File not found or Disk
Error on the bottom line. Please check USB disk or file. Re-attach disk to the port.
Once the firmware has been found, its file name, revision number, revision date and
time, file language and checksum are displayed. Click this button on begin the
upgrade.
Please refer to your Hardware Installation and Operation Manual
to locate this USB port as it may vary for each DVR.
FIRMWARE UPDATE
Current Revision: V15.0.0
Current Date/Time: Jun 14 2011 05:22:38
Current Language: International
File Name:
File Size:
File Revision:
File Date/Time:
File Language:
File Checksum:
Plug USB Disk
FIRMWARE UPDATE
Current Revision: V15.0.0
Current Date/Time: Jun 14 2011 05:22:38
Current Language: International
File Name: FWVX4TWNFWI
File Size: 7196672 Bytes
File Revision: V15.5.3
File Date/Time: Jan 15 2011 16:45:52
File Language: English
File Checksum: 0x02E165B5
Proceed Update
ENXDVR-4C User's Manual V-2
67