Screen Setup - Encore ENXDVR-4C User Manual

Databit
Select a data bit communication protocol: 8-bit or 7-bit
Parity
Select a parity configuration: Odd, Even, or No Parity
Stopbit
Select a stop bit configuration: 1 Stopbit or 2 Stopbit
NOTE
Keyboard (Optional)
Keyboard Model
Select the keyboard model you are using:
CK201, KB-KT301, EL-PT800
Keyboard ID
Adjusts the identification number based on the local settings of your keyboard. This
value may be any number from 1 to 16.
Keyboard Protocol
Provides options for the keyboard communication protocol: Pelco P, Pelco D,
Teleview Pelco P, Teleview Pelco D, Merit LILIN (3B), Merit LILIN (7B), HiSharp,
Nicecam and Elitar. This setting depends on the keyboard model being used.

Screen Setup

Use to adjust the video format and resolution of the display device.
NTSC/PAL Auto Detection
The system will automatically detect the video format NTSC/PAL from the video
source, i.e. security cameras.
Video Output Format
The selection of video output format NTSC or PAL is available while the
"NTSC/PAL Auto Detection" function is disabled.
Pan/Tilt/Zoom and RS-485 Settings may vary for each camera.
Be sure to match local camera settings to those you input on the
DVR.
ENXDVR-4C User's Manual V-2
OFF (if there is no keyboard), CK101,
63