Motion Setup - Encore ENXDVR-4C User Manual

Motion Setup

Motion Setup is accessed to configure the motion mode for the DVR channels.
NOTE
Record Detection Activate (Motion Setup)
This feature activates the motion setup (allowing you to detect unusual movements)
and enables the system to log motion-triggered events even when your DVR setting
is in "Time Recording" mode.
Enable: Activates motion-triggered detection even when DVR is in a different
recording mode. When enabled, a blinking motion icon will be found alongside the
Time Recording mode icon when motion is detected.
DETECTOR SETUP
Channel Number
Alarm Setup
Motion Setup
Record Detection Activate
Motion Mode
Record Time
Alarm Mode
Alarm Time
Trigger Full Screen
Trigger Type
Motion Area Setup
Sensor Setup
Remember to setup the motion mode period on "Record
Schedule" at the main menu of "Record Setup" after completing
"Motion Setup". Otherwise, the system will be recording in the
default schedule recording mode.
ENXDVR-4C User's Manual V-2
[ Enable]
[Sensitivity Normal]
[10Sec]
[Mute]
[10Sec]
[ OFF]
[Initial Trigger]

35