Alarm Setup (Optional) - Encore ENXDVR-4C User Manual

Alarm Setup (Optional)

Alarm Setup is accessed to configure the alarm mode of each channel, individually,
or for all channels, simultaneously.
NOTE: ENXDVR-4C only works on Buzzer and not on Alarm even though you may
see Alarm in the selection.
Light Detect Mode
This mode will be triggered when the video input and when the light from the
environment becomes faint or becomes dark unexpectedly (close to complete
darkness) or there is direct exposure by intense light. This mode is related to the
ambient lighting of the DVR. The light intensity settings will have no effect when
using the IR cameras.
Choose any of the following settings to adjust the sensitivity of light detection:
Sensitivity OFF: No sensitivity
Sensitivity Low: Low sensitivity level
Sensitivity Normal: Normal sensitivity level
Sensitivity High: High sensitivity level
Sensitivity Highest: Highest sensitivity level
Light Detect Alarm Mode
Select the alarm mode when the Light Detect Mode is triggered.
Mute: No beep whatever loss of light or not.
Buzzer-Short: Slow beeping sound from buzzer on main board.
Buzzer-Long: Fast beeping sound from buzzer on main board.
Alarm-Short: Short sound coming from the alarm.
Alarm-Long: Prolonged sound coming from the alarm.
DETECTOR SETUP
Channel Number
Alarm Setup
Light Detect Mode
Light Detect Alarm Mode
Blind Detect Mode
Blind Detect Alarm Mode
Video Loss Mode
Video Loss Alarm Mode
Motion Setup
Sensor Setup
ENXDVR-4C User's Manual V-2
[Sensitivity OFF]
[Mute]
[Sensitivity OFF]
[ Buzzer-Short]
[ Disable]
[ Buzzer-Short]
33