Main Menu - Encore ENXDVR-4C User Manual

ENXDVR-4C User's Manual V-2
Load Default Location
Press the icon " " to reset channel displays to their default locations.

Main Menu

Logging In for the First Time
Press the icon and enter the password to get the Main Menu screen.
The factory default password is "123456" (you can change this password)
Press to exit the password dialog.
NOTE:
When you enter and use the 123456 password which is tied up to the "admin" user
account you will be logged in to the system as admin even without entering the
username "admin". This is also applied to other default user accounts "power" with
default password 999999, "police" 111111 and "guest" 000000 and the rest of the
user accounts added to the system. Example: When prompted for password to
enter the DVR settings and you enter 999999 you will be logged-in as "power" user
and so on.
NOTE:
It is a good practice to create a backup admin user account with a different
username and password in case the default admin user account is deleted or you
forgot the password. Encore does not keep user's password. Example: Go to
"Authentication Setup" button , click on "Create" to create a new account and name
it admin2 or your preferred name, etc. with six digit numeric password 654321 or
your choice, then checkmark all the access rights (click on the red X to replace it
with the green checkmark), then save it.
20
Enter Main Menu Password
[ _ _ _ _ _ _]
▲
□ □ □ □ □
0 1 2 3 4
□ □ □ □ □
5 6 7 8 9
MAIN MENU