Record Channel; Hidden Channel - Encore ENXDVR-4C User Manual

"OFF"- Disables selected channel. The channel number icon turns to gray.

Record Channel

This parameter sets one channel or all of the channels to record videos. An active
channel will be displayed on screen even when it is not recording.
"ON" – recording
"OFF" – not recording

Hidden Channel

Set whether or not to display one or all channels on screen. The channel will continue
to record regardless of it being hidden or not.
"ON" – Hide the channel on screen. The channel square turns to black and channel
number icon turns to white.
"OFF"- Unhide the channel or channel is visible.
Channel Name
Designate a name for each channel. The channel name is limited to 24 characters.
1
q
a
z
Press the icon [
system: Room, Hall, Door, Lift, Area, Floor, Entry, and Point.
Press the icon " " to switch to big letters.
Press the icon " " to enter the channel name. The channel name will appear on the
channel square.
NOTE
Rotation Time
Sets the period (with a range of 2 to 30sec) of full screen display for each channel.
Image Position Adjustment
The steps to adjust the position of display on the monitor are as follows:
Channel Name
[ _____________________________ ]
▲
2 3 4 6 7
e r t y u
s d f g h j
x c v b n m
[Space]
Default Name] to select a channel name from the list defined by the
You may also define the name by using buttons on IR remote.
Kindly refer to the Hardware Installation and Operation Manual of
this DVR for the diagrams.
8 9 0 - =
i o p [ ] \
'
k l ;
, . / `
[ Default Name]
ENXDVR-4C User's Manual V-2
23