Alarm Mode; Motion Area Setup - Encore ENXDVR-4C User Manual

Alarm Mode

NOTE: Alarm-Short / Alarm-Long modes are not supported in ENXDVR-4C units
though this may appear in the selection menu.
Select the alarm mode when Motion Mode is triggered.
Mute: No beep whatever motion is detected or not.
Buzzer-Short: Slow beeping sound from buzzer on main board.
Buzzer-Long: Fast beeping sound from buzzer on main board.
Alarm-Short: Short sound coming from the alarm. See "Note" above.
Alarm-Long: Prolonged sound coming from the alarm. See "Note" above
Alarm Time
The Alarm Time is the duration of the beep and may be set to: "Nonstop"(no stop),
5sec, 10sec, 15sec, 20sec, 25sec, 30sec, 35sec, 40sec, 45sec, 50sec, 55sec or
60sec.
Trigger Full Screen
Trigger Full Screen is the duration of the of full-screen display when a channel is
triggered. This may be set to a period between 1 to 30 seconds.
OFF: It will not display on full screen when the channel has been triggered. Also, the
trigger area will turn to a red color.
Trigger Type
There are two trigger types: Initial Trigger and Continuous Trigger.
Initial Trigger
When channel has been triggered, the triggering event will be displayed on full screen
for the duration of the period set in Trigger Full Screen. During that period, this
channel will ignore any other triggering events.
Continuous Trigger:
When channel has been triggered, the triggering event will be displayed on full screen
for the duration of the period set in Trigger Full Screen. The channel is, however, still
actively monitoring during that period. Should there be a new triggering event, this
channel will display the more recent event and restart the display period.

Motion Area Setup

The Motion Setup allows the user to block multi areas on screen for every single
channel as motion detection area.
Select a channel to set.
All Select: Highlights the entire view displayed on the screen (as seen by the
camera)
All Deselect: Removes the selection from the entire view displayed on the
screen (as seen by the camera)
ENXDVR-4C User's Manual V-2
37