Auto Settings Adjustment; Channel Recording Setup - Encore ENXDVR-4C User Manual

Auto Settings Adjustment

This function can automatically allocate the recording power under the selected
record resolution.
When all the channels are set at the same resolution, the "Auto Settings
Adjustment" can automatically allocate the frame rate to every channel.
When the setting applies to a specific channel or to specific channels with a
particular resolution, video quality or frame rate the "Auto Settings Adjustment"
feature automatically allocates the remaining frame rate among the other channels.

Channel Recording Setup

The Channel Recording Setup is used to adjust the resolution, quality, frame rate
and performance gains of recording.
Channel Number
Select the icon " " to setup all channels at one time.
Select the icons " " ~ " " (for 16Ch) to individually setup of each channel.
Recording Resolution
Select the recording resolution for each or all channels as:
»
D1: 704x480 / 60fps (NTSC); 704x576 / 50fps (PAL)
»
Half D1: 704x240 / 120fps (NTSC); 704x288 (PAL) (Default)
»
CIF: 352x240 / 120fps (NTSC); 352x288 (PAL)
Video Quality
Video image quality settings can be Highest, High, Standard, Low, and Lowest. Default
is Standard.
Higher video quality provides a much clearer image for playback but can utilize a much
larger hard drive space with a larger file size.
Record Frame Rate
The recording frame rate for each or all channels may be set from 0~30 fps for NTSC or
0~25 fps for PAL.
NOTE
If the frame rate is set to 0, the DVR will not be recording.
ENXDVR-4C User's Manual V-2
31