Video Loss Alarm - Encore ENXDVR-4C User Manual

ENXDVR-4C User's Manual V-2
Blind Detect Mode
This mode will be triggered when there is no video input (in total darkness) whether
the security camera is purposely covered or blocked or there is a direct exposure to
intense light. This detects if there is a deliberate attempt to hide the view of the
camera. The light intensity settings will have no effect when using the IR cameras.
Choose any of the following settings to adjust the sensitivity of blind detection:
Sensitivity OFF: No sensitivity
Sensitivity Low: Low sensitivity level
Sensitivity Normal: Normal sensitivity level
Sensitivity High: High sensitivity level
Sensitivity Highest: Highest sensitivity level
Blind Detect Alarm Mode
Select the alarm mode when the Blind Detect Mode is triggered.
Mute: No beep whatever loss of light or not.
Buzzer-Short: Slow beeping sound from buzzer on main board.
Buzzer-Long: Fast beeping sound from buzzer on main board.
Alarm-Short: Short sound coming from the alarm.
Alarm-Long: Prolonged sound coming from the alarm.
Video Loss Mode
The Video Loss Mode is for detecting the loss of the camera video input. This is
when the camera cable is cut or cable disconnection.
Enable: Activates video loss detection
Disable: Deactivates video loss detection

Video Loss Alarm

Select the alarm mode when the Video Loss Mode is triggered.
Mute: No beep whatever video loss or not.
Buzzer-Short: Slow beeping sound from buzzer on main board.
Buzzer-Long: Fast beeping sound from buzzer on main board.
Alarm-Short: Short sound coming from the alarm.
Alarm-Long: Prolonged sound coming from the alarm.
34