NOTE
Drag-and-Drop Channel Swap
The Drag-and-Drop Channel Swap enables swapping channel displays using your
mouse. No need to interchange the video camera connectors. This function cannot
be use using the supplied remote control.
This function is also applicable for all kinds of Split View.
Drag and Drop Channel Repositioning
1% 2011/06/06 15:37:47
1% 2011/06/06 15:37:47
1% 2011/06/06 15:37:47
The Force Record function allows the user to bypass the current
recording mode setting and to immediately start recording videos
right then. The DVR will revert to its previously set mode once the
forced recording feature is deactivated.
»
»
»
»
ENXDVR-4C User's Manual V-2
Move the cursor onto the channel-
square you would like to shift.
Press left-button of the mouse (a
hand icon will appear) and drag the
channel-square to the new position.
Release the mouse button to drop
the channel-square into new
position.
System will keep the new channel
display arrangement even if you
reboot the DVR system.
19