Whites Setting; White Calibration - Chauvet COLORado 1 IP User Manual

Whites Setting

White Calibration

COLORado™ 1 IP User Manual Rev. 2
This setting allows you to select and edit the temperature of the white colors used in
channel 11 (Macros) when in the TOUR mode. You can also define the maximum RGB
values when RGB to White (RGbw.) is active.
1. Go to CAL1.
2. Select a white color (Wt.01~11).
3. Select a color (R., G., b., or w.).
4. Select a color value (000~255).
5. Repeat for the other colors.
When selecting RGbw., you will only be able to define the values of Red, Green, and
Blue.
The values of Red, Green, and Blue configured from CALIB > RGbw. will define the
color temperature shown when the RGB faders are set to 255 if SETTING > COLOR >
RGbw. is active.
This setting allows you to select the white color shown by the COLORado™ Range IP
when the color setting is RGbw. and the DMX controller's Red, Green, and Blue faders
are set to "255."
1. Go to the CAL2 > RGbw. level.
2. Select a color (R., G., or b.).
3. Select a color value (000~255).
4. Repeat for the other colors.
When selecting CAL2 > RGbw., you will only be able to define the values of Red,
Green, and Blue.
The values of Red, Green, and Blue configured from CAL2 > RGbw. will define the
color temperature shown when the RGB faders are set to "255" if SET > COLO >
RGbw. is active.
Operation
-13-