Color Settings; Dimmer Curves; Control Panel Lock - Chauvet COLORado 1 IP User Manual

Color Settings

Dimmer Curves

Control Panel
Lock
COLORado™ 1 IP User Manual Rev. 2
The COLO setting determines how the COLORado™ 1 IP generates the white color based
on various RGB settings.
1. Go to the SET main level.
2. Select COLO.
3. Select OFF, RGbw., or UC.
OFF: When all the RGB faders are set to 255, the output is maximum, although
the resulting white color may not be balanced.
RGbw. When all the RGB faders are set to 255, the resulting output is defined by
the configured White color (see
UC: When all the RGB faders are set to 255, the output matches that of less
efficient products (Universal Color).
This setting determines how fast the output of the COLORado™ 1 IP changes when you
modify the values of the Red, Green, Blue, White, and Dimmer faders. This setting
provides four different options to simulate the dimming curve of an incandescent lighting
product.
1. Go to the SET main level.
2. Select dIM.
3. Select a dimmer function (OFF, dIM1, dIM2, dIM3, or dIM4).
OFF: The output is proportional (linear) to the Dimmer and RGBW channel
values.
dIM1~4: The output follows the Dimmer and RGBW channel values based on the
corresponding dimmer curve, being dIM1 the fastest and dIM4 the slowest.
This setting enables you to activate or disable the control panel lock, which keeps non-
authorized personnel from changing the product's settings.
1. Go to the KEY main level.
2. Select ON or OFF.
When the control panel lock is active, the product will prompt you to enter the
password after 30 seconds of control panel inactivity or after turning on the product.
After being prompted to enter the password:
Press <UP>, <DOWN>, <UP>, <DOWN>, and <ENTER>
Whites Settings).
Operation
-11-