Modify Low Battery Time; Calibration Mode; Computer Mode; Remote Monitor Mode - Eaton Powerware 9315 Operation Manual

7.6.9 Modify Low Battery Time

This menu allows you to modify the low battery time warning. When selected, the
following menu is displayed:
Enter the new time desired to change the warning level.

7.7 Calibration Mode

Calibration mode is used by factory and field service personnel to calibrate system meters.
Factory test engineers calibrate the UPS meters prior to shipping so the UPS arrives at your
site correctly calibrated. After use, field service personnel may need to use Calibration
mode to recalibrate one or more meter settings.

7.8 Computer Mode

This mode provides a computer interface which gives your system compatibility with
system monitoring and network products. For a list of products available, contact your
sales representative.

7.9 Remote Monitor Mode

This mode provides the interface for the RMP, RIM, or SCM described earlier.
9315 UPS (300–500 kVA) Operation Manual S 164201119 Rev F www.powerware.com
EATON Powerware
®
Modify Low Battery Time
Low Battery Time (Minutes):
Enter New Low Battery Time:
NOTE Low Battery Time should be no greater than 999. Press <ENTER> to return with
no change.
NOTE Calibration mode is for use by service personnel ONLY. To prevent inadvertent
modification, this mode can be accessed only by trained personnel.
Serial Communication
004
7−17