Modify Low Battery Time; Calibration Mode; Computer Mode; Remote Monitor Mode - Eaton POWERWARE 9315 Installation And Operation Manual

12.6

Calibration Mode

12.7

Computer Mode

12.8

Remote Monitor Mode

EATON Powerware
12.5.8

Modify Low Battery Time

If Modify Low Battery Time (option 6) is selected from the Main menu (see
page 12-9), the following menu is displayed:
Modify Low Battery Time
Low Battery Time (Minutes):
Enter New Low Battery Time:
<CR> to return with no change.
NOTE Low Battery Time should be no greater than 999.
To change the Low Battery Time warning level, enter a new time.
Calibration mode is used by factory and field service personnel to calibrate system
meters. Factory test engineers calibrate the UPS meters prior to shipping so the UPS
arrives at your site correctly calibrated. After use, field service personnel may need to
use Calibration mode to recalibrate one or more meter settings.
NOTE Calibration mode is for use by service personnel ONLY. To prevent inadvertent modification, this
mode can be accessed only by trained personnel.
Computer mode provides a computer interface which gives your system compatibility
with system monitoring and network products. For a list of products available, contact
your Eaton sales representative.
Remote Monitor mode provides the interface for the RMP, RIM, or SCM described
earlier. Port 1 operates by default in Remote Monitor mode.
®
9315 UPS (500–750 kVA) Installation and Operation Manual
004
S
164201691 Rev 1 www.powerware.com
COMMUNICATION
12-13