Remote Monitor Panel; Figure 6-3. Remote Monitor Panel - Eaton Powerware 9315 Operation Manual

Using Features and Options

6.3 Remote Monitor Panel

As an option, you can install RMPs to monitor the operation of the UPS system from
virtually any location within your facility, up to 500 ft from the UPS. Each RMP contains
backlit status indicators and a local horn. You can flush-mount or surface-mount an RMP
on a desktop, wall, or wherever you have a serial interface line. A maximum of two
monitoring accessories (RMPs, Relay Interface Modules (RIMs), or Supervisory Contact
Modules) can be installed. See Table 6-1 for the number of accessories permitted.
Figure 6-3 shows an RMP.

Figure 6-3. Remote Monitor Panel

9315 UPS (300–500 kVA) Operation Manual S 164201119 Rev F www.powerware.com
6−3
EATON Powerware
®