Figure 6-5. Supervisory Contact Module - Eaton Powerware 9315 Operation Manual

6.7 Supervisory Contact Module
An optional SCM establishes an interface between the UPS manufacturer's equipment and
the customer's monitor. This interface allows the customer to monitor operational status
of the UPS equipment. A maximum of two monitoring accessories (RMPs, RIMs, or SCMs)
can be installed. See Table 6-1 on page 6−4 for the number of accessories permitted.
Figure 6-5 shows the SCM, input connections on TB1, and output connections on TB2.
The SCM provides signals for the following indications:
Refer to the Supervisory Contact Module section in the Powerware 9315 (300–500 kVA)
UPS Installation Manual for TB2 contact configurations.
9315 UPS (300–500 kVA) Operation Manual S 164201119 Rev F www.powerware.com
EATON Powerware
®
TB2

Figure 6-5. Supervisory Contact Module

SYSTEM NORMAL
NO REDUNDANCY
ON GENERATOR
BYPASS NOT AVAILABLE
ON BATTERY
UPS ALARM
ON BYPASS
SHUTDOWN IMMINENT
Using Features and Options
TB2-1 through TB2-3
TB2-4 through TB2-6
TB2-7 through TB2-9
TB2-10 through TB2-12
TB2-13 through TB2-15
TB2-16 through TB2-18
TB2-19 through TB2-21
TB2-22 through TB2-24
6−7