Table of Contents
Advertisement
Operation
TOUR Notes
Master Dimmer
Red, Green, Blue
and White Color
Selection
Color Macros
Strobe
Auto/Custom/Fan
Dimmer Speed
Zoom Selection
Zoom Reset
-14-
These notes intend to clarify the way the TOUR DMX personality works.
Channel 1 controls the intensity of the currently projected color.
When the slider is at the highest position (100%), the intensity of the output is at its
maximum.
Channels 2 through 5 control the intensity ratio of each of the Red, Green, Blue, and
White LEDs.
When the slider is at the highest position (100%), the intensity of each color is at its
maximum if SET > COLO is OFF.
You can combine channels 2 through 5 to create over one trillion colors.
Channel 6 selects the required Color Macro.
Channel 6 has priority over channels 2 through 5.
Channel 1 controls the intensity of the Color Macro.
Channel 7 controls the strobe frequency (not the intensity) of channels 2 through 6.
Channel 7 can strobe channels 2 through 7 when not running macros, allowing the
individual faders (RGB and W) as well as channel 1 (D) to control the output intensity.
Channel 7 can strobe channel 6 when running macros, allowing channel 6 to select the
macro and channel 1 to control the output intensity.
Channel 8 selects the preset auto programs AT. 01~10 or the custom programs PR.
01~10.
When activating the custom Auto programs PR. 01~10, it is possible to control the Step
Time and Fade Time using channels 2 and 3 respectively.
Channel 9 has priority over channels 2 through 7.
Channel 9 controls the speed at which each auto programs plays.
Channel 10 selects the dimmer mode and speed. When DIMMER is set to OFF, the
changes in the RGBW and Master Dimmer faders are linear. Otherwise, DIM1 is the
fastest dimmer curve, while DIM4 is the slowest.
Channel 11 controls the zoom function.
Channel 12 resets the zoom function to the starting position.
COLORado™ Zoom Tour User Manual Rev. 07
Advertisement
Table of Contents
