4. Operation
Control Panel
Description
Control Options
Programming
DMX Personality
COLORado™ Zoom Tour User Manual Rev. 07
Button
<MENU>
Exits from the current menu or function
Enables the currently displayed menu or
<ENTER>
sets the currently selected value into the
current function
Navigates upward through the menu list and
<UP>
increases the numeric value when in a
function
Navigates downward through the menu list
<DOWN>
and decreases the numeric value when in a
function
You can set the COLORado™ Zoom Tour start address in the 001~512 DMX range. This
allows for the control of up to 42 units in the 12-channel TOUR personality.
Refer to the Menu Map on page 15 to learn how the menu options relate to each other.
The Menu Map has a Main Level and a variable number of programming levels for each
option.
To go to an option in the Main Level, press <MENU> repeatedly until the option appears on
the display. Press <ENTER> to select. You will go to the first programming level for that
option.
To select an option or value within the current programming level, press <UP> or <DOWN>
until shown on the display. Press <ENTER> to select. If there is another programming
level, you will see the level's first option. If not, you will see the selected value.
To exit to the previous menu level, press <MENU>.
This setting allows the user to choose a particular DMX personality.
1. Go to PERS.
2. Select the desired personality (TOUR, ARC1, AR1D, ARC2, AR2D, AR2S, or
HSV).
See the DMX Values section for the highest starting address you can select for
each personality.
Make sure that the starting addresses on the various units do not overlap due to
the new personality setting. See the DMX Values section.
Function
Operation
-9-