Mounting; Orientation; Rigging - Chauvet COLORado Zoom TOUR User Manual

Setup

Mounting

Orientation

Rigging

Procedure
Product Mounting
Diagram
-8-
Before mounting this product, read and follow the safety recommendations indicated in the
Safety Notes section (page 2 of this manual).
Always mount this product in a safe position making sure there is adequate room around it
for ventilation, configuration, and maintenance.
The COLORado™ Zoom Tour consists of the double-bracketed yoke and the body of the
fixture. CHAUVET® recommends following the general guidelines below when mounting
this product.
 When selecting an installation location, consider ease of access to this product for
operation, programming adjustments, and routine maintenance.
 Make sure to mount this product away from any flammable material as indicated in the
Safety Notes section.
 Never mount the product in places where rain, high humidity, extreme temperature
changes, or restricted ventilation may affect it.
 If hanging this product, make sure that the location where you are mounting it can
support its weight. Please refer to the Technical Specifications section of this manual
for the weight requirement of this product.
The COLORado™ Zoom Tour comes with a double-bracketed yoke to which you can
attach mounting clamps or the yolk can serve as floor stand. You must supply your own
mounting clamps. Make sure the clamps are capable of supporting the weight of this
product. You will have to use at least one mounting point per unit.
Overhead Mounting
Clamp
Safety
Cable
Floor Mounting
COLORado™ Zoom Tour User Manual Rev. 07
Double-
bracketed
yoke