Dmx Control; Static Color; Auto Programs; Edit Customs - Chauvet COLORado Zoom TOUR User Manual

Operation

DMX Control

Static Color

Auto Programs

Edit Customs

-10-
In this mode, each unit will respond to a unique starting address from the DMX controller.
All units with the same starting address will respond in unison.
1. Select a DMX personality as shown in DMX Personality.
2. Set the running mode:
a. Go to RUN.
b. Select DMX.
3. Set the starting address:
a. Go to DMX.
b. Select the starting address (001~512).
The highest recommended starting address for each DMX mode is as follows:
DMX Mode DMX Address
TOUR 501
ARC1 510
AR1D 509
The Static Color mode allows for permanent RGBW color mixing without a DMX controller.
1. Go to STAT.
2. Select the desired color (R., G., B., W., or Z.).
3. Select the desired color and zoom value (0~255).
4. Select (S.)
5. Select the desired frequency (0~20).
Auto programs allow for dynamic RGBW color mixing without a DMX controller.
1. Go to AUTO.
2. Select the desired auto (AT. 01~10) or custom program (PR. 01~10).
You cannot edit any of the auto programs (AT. 01~10). However, you can edit the
custom programs (PR. 01~10). See Edit Customs for details.
This setting allows the programming of up to 30 scenes for each of the 10 customizable
programs, including colors and effects.
1. Go to EDIT.
2. Select the desired custom program (PR. 01~10).
3. Select the desired scene (SC. 01~30).
4. Select the desired color or effect (R, G, B, W, Z, S, T, or F).
5. Select the color or effect value (000~255 for colors, zoom, and timers, or 00~20 for
strobe).
6. Repeat for the other colors or effects.
7. Return to the scene level (step 3).
8. Repeat the settings of colors and effects for the other scenes.
DMX Mode DMX Address
ARC2 509
AR2D 508
AR2S 507
COLORado™ Zoom Tour User Manual Rev. 07
DMX Mode DMX Address
HSV 510