Card Reader-E1
If the Card Reader-E1 is attached to the machine, you must insert a control card to
operate it. The Card Reader-E1 performs Department ID Management
automatically.
IMPORTANT
3
If User ID Management in System Settings (from the Additional Functions screen) is set
to 'On', manually enter your card number in the card ID field. See the Remote UI Guide
for details.
NOTE
•
If the Basic Features screen does not appear on the touch panel display when the control
card is inserted, make sure that:
- The control card is inserted in the correct direction.
- The control card is inserted as far as it can go.
- An unusable control card is not inserted. (For example, cards which are damaged or
•
Insert a usable control card correctly.
•
For instructions on turning the power ON, see "Main Power and Control Panel Power," on
p. 1-16.
•
If the Card Reader-E1 is attached, the type of card shown below can be used. An
optional type card can manage up to 1,000 departments.
3-14
Card Reader-E1
cards prohibited from use.)
Optical Type Card