Card Reader-E1 - Canon iR2025 Reference Manual

Card Reader-E1

If the Card Reader-E1 is attached to the machine, you must insert a control card to operate it.
The Card Reader-E1 performs Department ID Management automatically.
IMPORTANT
If User ID Management is set to 'On', enter your card number in the card ID field. See the Remote UI
Guide for details.
NOTE
• If the Basic Features screen does not appear on the touch panel display when the control card is
inserted, make sure that:
- The control card is inserted in the correct direction.
- The control card is inserted as far as it can go.
- An unusable control card is not inserted. (For example, cards which are damaged or cards prohibited
from use.)
• Insert a usable control card correctly.
• For instructions on turning the power ON, see "Main Power and Control Panel Power," on p. 1-16.
• If the Card Reader-E1 is attached, the type of card shown below can be used. A magnetic type card can
manage up to 1,000 departments.
Magnetic Type Card
CONTROL CARD
1 2 3
3-19

Card Reader-E1

3