Finishing Modes
The Finisher-U2 is equipped with the following finishing modes.
CAUTION
•
Do not place anything other than output paper in the trays of the finisher, as this
may damage the trays.
•
Do not place anything under the trays of the finisher, as this may damage the
trays.
NOTE
If the Collate or Group mode is set, the output trays move downward as the stack of
paper that is output increases in quantity and thickness. Once an output tray has reached
its stacking limit, printing stops temporarily. Remove all of the prints from the output tray,
and printing resumes.
■ Collate Mode
Prints are automatically collated into sets arranged in page order. The collated print sets
can be shifted by pressing [Offset].
■ Group Mode
All prints of the same original page are grouped together. The grouped print sets can be
shifted by pressing [Offset].
3-9
Finisher-U2
3