Card Reader-E1 - Canon IMAGERUNNER 2016 Reference Manual

Card Reader-E1

If the Card Reader-E1 is attached to the machine, you must insert a control card to
operate it. The Card Reader-E1 performs Department ID Management
automatically.
NOTE
•
If the Standby display does not appear when the control card is inserted, make sure that:
- The control card is inserted in the correct direction.
- The control card is inserted as far as it can go.
- An unusable control card is not inserted. (For example, cards which are damaged or
4
•
Insert a usable control card correctly.
•
For instructions on turning the power ON, see "Main Power and Control Panel Power," on
p. 1-20.
•
If the Card Reader-E1 is attached, only the type of card shown below can be used. An
optical type card can manage up to 300 departments.
4-16

Card Reader-E1

cards prohibited from use.)
Optical Type Card