Feeder Smudge Adjustment
If the feeder is dirty, dots or lines may appear on copies or prints. The Auto
Adjustment for Dirty Feeder mode prevents dirt and grime in the feeder from
appearing on your prints and copies.
IMPORTANT
If either [JPEG] or [PDF (Compact)] is selected for [File Format] when the Send function
is used, the setting for this mode is not applied.
NOTE
•
While some dots or lines may continue to be printed even if the Auto Adjustment for Dirty
Feeder mode is set to 'On', copies are significantly clearer than when this mode is set to
'Off'.
•
The default setting is 'On'.
1
Press
If necessary, see the screen shot in step 1 of "Improving Print Quality and Density
(Special Mode M)," on p. 4-70.
2
Press [▼] or [▲] until [Auto Adjustment for Dirty Feeder]
appears ➞ press [Auto Adjustment for Dirty Feeder].
(Additional Functions) ➞ [Adjustment/Cleaning].
Adjusting the Machine
4
4-83