Department Id Management; Changing The Password And Page Limit - Canon IMAGERUNNER 2030 i Reference Manual

Department ID Management

This section describes how to change the password and page limit, and how to
check the print totals when a control card is being used.
IMPORTANT
Do not change the password when using a control card. The control card will become
unusable if the password for the Department ID is changed.
NOTE
•
You cannot store a password that only consists of zeros, such as <0000000>.
If you enter fewer than seven digits, the machine stores the password with leading zeros.
- Example: If <02> or <002> is entered, <0000002> is stored.
•
You can set the page limit from 0 to 999,999 pages.

Changing the Password and Page Limit

1
Press
If the System Manager ID and System Password have been set, enter the System
Manager ID and System Password using
(Log In/Out).
(Additional Functions) ➞ [System Settings].
(numeric keys) ➞ press
-
Card Reader-E1
3
3-17