Storing Paper; Storing Printouts - Canon LBP 5300 User Manual

Capt
Hide thumbs Also See for LBP 5300:
Table of Contents

Advertisement

Storing Paper

The quality of paper may deteriorate if it is stored improperly even when the paper
meets the normal specifications. Inferior paper may cause misfeeds, paper jams, or
deterioration in print quality.
Observe the following guidelines when storing and handling paper:
IMPORTANT
• Store paper away from moisture since paper quality deteriorates in a moist environment.
• Paper wrappers help avoiding moisture and dryness. Keep paper in the wrapper until it is
ready to be used. Store all unused paper in a wrapper.
• Store paper on a flat surface.
• Do not store paper on the floor where water and moisture can accumulate.
• Avoid physical damage to stored paper.
• Do not store paper vertically or store too many stacks of paper in one pile.
• Do not store paper in places exposed to direct sunlight or places with high or low
humidity.
• If the paper storage room and work area differ from each other significantly in
temperature or humidity, keep packed paper stack in the work area for at least one day
prior to printing so that it can adapt to the new environment. When paper is moved to a
location where the temperature or humidity differs significantly, the paper may curl or
become creased.

Storing Printouts

When handling or storing printouts printed by this printer, be careful of the following
points:
IMPORTANT
• Avoid storing printouts with PVC materials such as clear folders. Otherwise toner may
melt and stick to the PVC material.
• Use insoluble adhesive when gluing printouts. Toner may melt when soluble adhesive is
used. Before using the adhesive, test it with paper that is no longer required.
Make sure that the printed paper is completely dry before placing one over another.
Toner may melt if they are placed together half-dried.
• Store paper on a flat surface. Toner may peel when they are folded or creased.
• Avoid storing printouts at high temperatures. Otherwise toner may melt and blot.
• Put printouts in a binder when storing them for a long period of time (two years or longer).
(Printouts may discolor when they are stored for a long period of time.)
Paper Requirements
3
3-9

Advertisement

Table of Contents
loading

Table of Contents