Table of Contents
Advertisement
4
Click [OK].
The Printing Position Adjustment Print is printed as shown in the following. The
printed arrow is the top edge of the Printing Position Adjustment Print.
NOTE
When you print the Printing Position Adjustment Print with the [Check Duplex Unit
Also] check box selected in Step 3, the side on which a solid black arrow is printed
is to be the printout result of the front side, and the side on which an outlined arrow
is printed is to be that of the back side.
Next, check the printout results and specify the position to be adjusted in "Adjusting the
Printing Position" (See p. 6-30).
Adjusting the Printing Position
6
6-29
Advertisement
Table of Contents
Troubleshooting
