Table of Contents
Advertisement
3
7
3-56
Setting Up the Printer Driver and Printing
Paper Type
Plain paper
60 - 105 g/m
106 - 120 g/m
Heavy paper
121 - 176 g/m
177 - 220 g/m
Transparency
Label
Coated paper
105 - 120 g/m
Envelope
1
*
Specify this option if you want to give a gloss to plain paper (75 - 105 g/m
2
*
Specify this option when a paper jam occurs or when you want to improve the fixation on printing
coarse paper (75 - 105 g/m
3
*
It is not recommended to print on heavy paper that weighs between 177 and 220 g/m
specify [Heavy Paper 3] if you have to perform the printing.
4
*
When you print coated paper that weighs between 121 and 160 g/m
Paper], click [Finishing Details] in the [Finishing] sheet, click [Advanced Settings] in the [Finishing
Details] dialog box, and then set [Fixing Mode] in the [Advanced Settings] dialog box to [Mode 1].
5
*
When printing envelopes, the printer automatically applies the appropriate print mode to the
envelope type by specifying [Output Size] in the [Page Setup] sheet.
Click [OK] to close the Properties dialog box.
2
2
2
2
3
*
2
2
) with [Plain Paper] selected.
Printer Driver Setting
[Plain Paper]
1
[Plain Paper H]*
2
[Rough Paper]*
[Heavy Paper 1]
[Heavy Paper 2]
[Heavy Paper 3]
[Transparency]
[Label]
4
[Coated Paper]*
5
*
2
) to be printed.
2
. However,
2
, set [Paper Type] to [Coated
Advertisement
Table of Contents
Troubleshooting
