The Alarm Indicator is On (a Service Error Appears)
When a problem has occurred and the printer does not work properly, the
(Alarm) indicator (orange) comes on and the following service error appears in the
Printer Status Window.
If the service error appears, cycle the power of the printer using the following
procedure. This may clear the message.
NOTE
For details on methods for displaying the Printer Status Window, see "Displaying the
Printer Status Window," on p. 5-93.
* When the error code "E012 0000" appears, see
"When the Duplex Unit is Not Installed Properly"
(p. 7-26) and install the duplex unit.
The Alarm Indicator is On/Blinking
7
7-33