Power Saving (Sleep Mode) - Canon LBP 5300 User Manual

1
Press "

Power Saving (Sleep Mode)

You can reduce power consumption efficiently by using the sleep mode when the
printer is idle or not in use. Use the sleep mode using the following procedure.
IMPORTANT
• Even if the power switch is turned OFF, power is consumed only slightly while the power
plug is inserted into the AC power outlet. To cut the power consumption completely,
unplug the power plug from the AC power outlet.
• Since calibration or correction of a phenomenon of "Out-of-Register Colors" is not
performed automatically during the sleep state, you may not obtain appropriate printout
results when printing immediately after the sleep state is released. In this case, perform
calibration manually (See p. 6-18) or correction of the phenomenon of "Out-of-Register
Colors" (See p. 6-23).
NOTE
• You can select [5], [10], [15], [30], [60], [90], [120], [150], or [180] minutes for [Time to
Enter Sleep Mode]. The default value is [30] minutes. You can also configure the printer
not to enter the sleep mode.
• The sleep mode is cleared in the following circumstances:
- Printing is performed
- Calibration is performed
- Correction of a phenomenon of "Out-of-Register Colors" is performed
- Cleaning is performed
" of the power switch on the printer.
Turning the Printer ON/OFF
2
2-35