Network Settings - Canon LBP 5300 User Manual

■ [Printing Position Adjustment]
Check the printing position with the Printing Position Adjustment Print that is output in
[Printing Position Adjustment Print] in [Utility] in the [Options] menu and adjust the printing
position with this option (moves in the horizontal direction). For more details, see
"Adjusting the Printing Position," on p. 6-27.
■ [Settings of the Cancel Job Key]
The job that can be canceled using the
this dialog box applies to the jobs of all users.
■ [Sleep Settings]
Specify whether to use the sleep mode or the time to switch to the sleep mode. When
data is not sent from the computer or when the printer status remains as it is longer than
the time specified in [Time to Enter Sleep Mode], the printer switches to the sleep mode.
The sleep mode consumes less power during the sleep state. When you use the sleep
mode, select the [Use Sleep Mode] check box, and then specify the time to switch to the
sleep mode in [Time to Enter Sleep Mode]. For more details, see "Power Saving (Sleep
Mode)," on p. 2-35.
5
■ [Calibration Settings]
You can set the printer to perform calibration automatically at the designated time
everyday. You can also specify whether the printer should perform calibration immediately
after the printer is turned ON. For more details, see "Calibrating the Printer," on p. 6-18.
■ [Cassettes Settings]
Allows you to specify which paper cassette is to be used when [Paper Source] in the
[Paper Source] sheet is set to [Auto] (when the paper source is selected automatically).
For more details, see "Selecting a Paper Source," on p. 3-12.
■ [Warning Display Setting]
Specify whether to display the message that warns you of the printer status (the message
indicating that the toner cartridge needs to be replaced) in the Printer Status Window.
■ [Network Settings]
If you are using Windows XP Service Pack 2 or another operating system equipped with
Windows Firewall, and the network settings for the printer is not specified, the printer may
not be detected when installing the software for the network environment. In this case,
connect the printer and computer with the USB cable, install the printer driver, and then
specify the network settings in this dialog box in advance. For more details, see "Network
Guide".
5-98 Printer Status Window
(Cancel Job) key is specified. The settings in