Canon LBP 5300 User Manual page 423

Cause 2
Remedy
Cause 3
Remedy 1 Data cannot be printed within a 5 mm margin (10 mm for envelopes) on all sides
Remedy 2 Select the [Print with Upper Left of Sheet as Starting Point] check box in the
IMPORTANT
Depending on the print data to be printed, the edge of paper may be missing partly
during printing or may blot during color printing.
The printing position is skewed.
Cause 1
Remedy
7
Cause 2
Remedy
Cause 3
Remedy
The next page is printed from halfway across the previous page.
Cause
Remedy
7-42 Print Quality Problems
The position of the paper is incorrect.
Load the paper properly. (See "Loading Paper in the Paper Cassette," on p.
3-17, "Loading Paper in the Multi-purpose Tray," on p. 3-33)
A document with no margins was printed.
of the paper. Secure a margin around the data.
printer driver, then print the document.
In order to specify the setting for [Print with Upper Left of Sheet as Starting
Point], display the [Finishing Details] dialog box by clicking [Finishing Details] in
the [Finishing] sheet.
[Gutter] is specified.
Specify [Gutter] in the printer driver to [0].
In order to specify the setting for [Gutter], display the [Gutter Settings] dialog
box by clicking [Gutter] in the [Finishing] sheet.
"Top Margin" and "Paper Position" in the application are not specified properly.
Specify the settings for "Top Margin" and "Paper Position" in the application
properly. (See the instruction manual supplied with the application)
The printing position is adjusted in [Printing Position Adjustment] in [Device
Settings] in the [Options] menu in the Printer Status Window.
Adjust the printing position in [Printing Position Adjustment] in [Device Settings]
in the [Options] menu in the Printer Status Window. (See "Adjusting the Printing
Position," on p. 6-27)
"Line Spacing" or "Lines/Page" in the application is not specified properly.
Specify the settings for "Line Spacing" and "Lines/Page" in the application so
that data fits in one page, and print again. (See the instruction manual supplied
with the application)