Flashloading New Firmware Into The Print Server; Changing Language In The Print Server's Web Interface - Axis 27979R1 User Manual

Print Server Levels

Flashloading New Firmware into the Print Server

Changing Language in the Print Server's Web Interface

AXIS 5550 User's Manual
Print server signature levels are assigned by a new NET.CFG parameter
SIGNATURE LEVEL = n
Key to Print Server Levels
0
1 (default)
2
3
Regardless of server level, the AXIS print server has the capability to log
in in Print Server Mode since it supports NCP Packet Level 3 (which is the
most restrictive).
These procedures are taken care of automatically. There are no
configurable parameters in the Print Server for choosing the NCP Packet
Signature Level. The AXIS print server adapts itself to the Server Level.
The firmware can easily be upgraded, since flash loading is possible from
the print server's internal Web pages. Client software is not needed to
upgrade the firmware. See Upgrading from the Print Server's Internal Web
Pages, on page 83.
English, French, German, Italian, Japanese and Spanish is supported in
the print server's Web interface, with English as the default language.
You can change the language used for the print server's Web interface
from the User mode:
1. Click the Change button next to 'Language'.
2. Choose your preferred language and character set from the drop-down lists,
click OK and then press F5 to refresh the view.
You can change the Character Set by clicking the Change button. The
default Character Set is ISO-8859-1, which can be applied in most cases.
Japanese requires SHIFT_JIS.
Explanation
Print server does not sign packets
Print server signs packets only if the server requests it (server
option is 2 or higher)
Print server signs packets if the server is capable of signing
(server option is 1 or higher)
Print server signs packets and requires the server to sign
packets (or logging in will fail)
Configuration Possibilities
117