Securing The Fireplace - Heat & Glo LifeStyle RH-36 Series Owner's Manual

Woodburning
Table of Contents

Advertisement

CAUTION
Risk of Smoke Spillage
Outside air inlet must be located to prevent blockage
from:
• Leaves
• Snow/ice
• Other debris
Blockage may cause combustion air starvation.
Close
Open
Figure 4.4
Locating the Outside Air Control
14
Heat & Glo • RH-36/RH-42 • 4044-153 Rev S • 06/07
B. Securing the Fireplace
• Position the Fireplace
This fi replace may be placed on either a combustible or
noncombustible continuous fl at surface. Follow the in-
structions for framing in Section 3.D. Slide the fi replace
into position. Be sure to provide the minimum air clear-
ance at the sides and back of the fi replace assembly.
See Section 3.B.
WARNING
Fire Risk!
Prevent contact with sagging, loose
insulation.
Do NOT install against vapor barriers or
exposed insulation.
WARNING
Fire Risk!
Metal hearth strips MUST be installed.
Sparks or embers may ignite fl ooring.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rh-42 series

Table of Contents