Adjusting The Backlight's Brightness; Resetting The Main Remote Control Unit - Denon AVP-A1HDE Owner's Manual

Signal
transmission
indicator
[ AMP]
[SYSTEM CALL]
[CHANNEL+/–]
[NUMBER]


Adjusting the Backlight's Brightness

The display's brightness can be adjusted in 5 steps.
(Default: Step 3)
[MODE
1
SELECTOR]
Press and hold in
The signal transmission indicator flashes twice.
2
[CHANNEL +]
Press
The display gets one step brighter when
The display gets one step darker when
3
[RC SETUP]
Press

Resetting the Main Remote Control Unit

Learning Function
GResetting button by buttonH
[RC SETUP]
1
[MODE SELECTOR]
Press
reset.
2
Press and hold in
The signal transmission indicator flashes twice.
3
[9] [7]
Press ,
The signal transmission indicator flashes twice.
4
Press the button you want to reset twice.
The signal transmission indicator flashes twice.
GResetting by device modeH
1
[MODE SELECTOR]
Press
reset.
2
Press and hold in
The signal transmission indicator flashes twice.
3
[9] [7]
Press ,
The signal transmission indicator flashes twice.
4
[MODE SELECTOR]
Press
reset twice.
The signal transmission indicator flashes twice.
[RC SETUP]
for at least 3 seconds.
[CHANNEL –]
or .
[+]
is pressed.
[–]
is pressed.
to complete the setting.
for the device you want to
[RC SETUP]
for at least 3 seconds.
[6]
and , in that order.
for the device you want to
[RC SETUP]
for at least 3 seconds.
[6]
and , in that order.
for the device you want to
System call function
1
[RC SETUP]
Press and hold in for at least 3 seconds.
The signal transmission indicator flashes twice.
2
[9] [7] [8]
Press , and , in that order.
The signal transmission indicator flashes twice.
3
[SYSTEM CALL] 1 2 3
Press ( , or ) you want to reset.
4
[RC SETUP]
Press and hold in for at least 3 seconds.
The signal transmission indicator flashes twice.
Punch-through function
1
[MODE SELECTOR]
Press for the device you want to
reset (TV or SAT/CBL).
2
[RC SETUP]
Press and hold in for at least 3 seconds.
The signal transmission indicator flashes twice.
3
[9] [8] [4]
Press , and , in that order.
The signal transmission indicator flashes twice.
4
[RC SETUP]
Press and hold in for at least 3 seconds.
The signal transmission indicator flashes twice.
All settings
1
[RC SETUP]
Press and hold in for at least 3 seconds.
The signal transmission indicator flashes twice.
2
[9] [8] [1]
Press , and , in that order.
The signal transmission indicator flashes 4 times.
All the settings are restored to their defaults.