Page 1 Contents Connections Playback Settings Tips Appendix AVC-S660H INTEGRATED NETWORK AV AMPLIFIER Owner’s Manual Front panel Display Rear panel Remote Index...
Page 2 Contents Connections Playback Settings Tips Appendix Accessories Connecting a TV Connection 1 : TV equipped with an HDMI connector and Inserting the batteries compatible with the ARC (Audio Return Channel) / eARC Operating range of the remote control unit (Enhanced Audio Return Channel) Features Connection 2 : TV equipped with an HDMI connector and High quality sound...
Page 3 Contents Connections Playback Settings Tips Appendix Playback AirPlay function Playing songs from your iPhone, iPod touch or iPad Basic operation Playing iTunes music with this unit Turning the power on Play a song from your iPhone, iPod touch or iPad on multiple Selecting the input source synced devices (AirPlay 2) Adjusting the volume...
Page 4 Contents Connections Playback Settings Tips Appendix Settings Selecting a sound mode Selecting a sound mode Menu map Direct playback Menu operations Auto surround playback Audio Description of sound mode types Subwoofer Level Sound mode that can be selected for each input signal Surr.Parameter HDMI Control function Restorer...
Page 5: Input Assign
Contents Connections Playback Settings Tips Appendix Inputs Network Input Assign Information Source Rename Connection Hide Sources Wi-Fi Setup Source Level Settings Speakers Network Control Audyssey ® Setup Friendly Name Diagnostics Procedure for speaker settings (Audyssey ® Setup) Error messages AirPlay Wi-Fi and Bluetooth Retrieving Audyssey ®...
Page 6 Contents Connections Playback Settings Tips Appendix Tips General Language Tips Troubleshooting Bluetooth Transmitter Power does not turn on / Power is turned off Quick Sel.Names Operations cannot be performed through the remote control unit Front Display Display on this unit shows nothing Firmware No sound comes out Information...
Page 7 Contents Connections Playback Settings Tips Appendix Appendix About HDMI Relationship between video signals and monitor output Playing back a USB memory devices Playing back a Bluetooth device Playing back a file saved on a PC or NAS Playing back Internet Radio Personal memory plus function Last function memory Sound modes and channel output...
Page 8 Playback Settings Tips Appendix Thank you for purchasing this Denon product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading this manual, be sure to keep it for future reference. Accessories Check that the following parts are supplied with the product.
Page 9 Contents Connections Playback Settings Tips Appendix Inserting the batteries NOTE 0 To prevent damage or leakage of battery fluid: 0 Do not use a new battery together with an old one. Remove the rear lid in the direction of the arrow and 0 Do not use two different types of batteries.
Page 10 Contents Connections Playback Settings Tips Appendix Features High quality sound High performance With discrete circuit technology, the power amplifier provides 8K 60Hz input/output supported identical quality for all 5-channels (100 Watts x 5-channels) For optimum realism and stunning dynamic range, the power amplifier section features discrete power devices (not integrated circuitry).
Page 11 Contents Connections Playback Settings Tips Appendix Digital video processor upscales HD (1080p) / 4K to 8K HDMI connections enable connection to various digital AV devices (6 inputs, 1 output) 8K Ultra HD 1080p/4K up scaling This unit is equipped with a 8K video upscaling function that allows HD (High Definition) 1080p/4K video to be output via HDMI at 8K (7680 ×...
Page 12 Contents Connections Playback Settings Tips Appendix Playback of DSD and FLAC files via USB and networks The device is equipped with a AirPlay ® function in addition to network functions such as Internet radio etc. (v p. 76) This unit supports the playback of high resolution audio formats such as DSD (5.6 MHz) and FLAC 192 kHz files.
Page 13 Download the appropriate “Denon 2016 AVR Remote” App for your iOS or power supply when the unit is not in use. This helps reduce Android devices. This unit needs to be connected to the same LAN or Wi-Fi unnecessary power use.
Page 14 Contents Connections Playback Settings Tips Appendix HEOS provides streaming music from your favorite online music Easy operation sources “Setup Assistant” provides easy-to-follow setup instructions First select the language when prompted. Then simply follow the instructions displayed on the TV screen to set up the speakers, network, etc.
Page 15 Contents Connections Playback Settings Tips Appendix Part names and functions Front panel Q1 1 For details, see the next page. Front panel Display Rear panel Remote Index...
Page 16 Contents Connections Playback Settings Tips Appendix C SOURCE SELECT knob This selects the input source. (v p. 48) D Remote control sensor This receives signals from the remote control unit. (v p. 9) Q0 Q1 1 E Display This displays various pieces of information. (v p. 18) F MASTER VOLUME knob This adjusts the volume level.
Page 17 Contents Connections Playback Settings Tips Appendix N Headphones jack (PHONES) This is used to connect headphones. When the headphones are plugged into this jack, audio will no longer be output from the connected speakers or from the SUBWOOFER Q2 Q3 connectors.
Page 18 Contents Connections Playback Settings Tips Appendix Display A Input mode indicators D Sleep timer indicator These light according to the audio input mode settings of each input This lights when the sleep mode is selected. (v p. 97) source. (v p. 135) B Decoder indicators These light when Dolby or DTS signals are input or when the Dolby or DTS decoder is running.
Page 19: Input Signal
Contents Connections Playback Settings Tips Appendix E Volume indicator F MUTE indicator This blinks while the sound is muted. (v p. 49) G Information display The input source name, sound mode, setting values and other information are displayed here. H Input signal indicators The respective indicator will light corresponding to the input signal.
Page 20 Contents Connections Playback Settings Tips Appendix Rear panel For details, see the next page. Front panel Display Rear panel Remote Index...
Page 21 Contents Connections Playback Settings Tips Appendix 0 The antenna clip can be removed from the rear panel. A Rotate the antenna clip 90 degrees to the left. w e r B Pull the antenna clip out towards yourself. 0 The antenna clip is needed when transporting this unit. Keep it in a safe place.
Page 22 Contents Connections Playback Settings Tips Appendix G HDMI connectors Used to connect devices equipped with HDMI connectors. “Connection 1 : TV equipped with an HDMI connector and compatible with the ARC (Audio Return Channel) / eARC (Enhanced Audio Return Channel)” (v p. 34) “Connection 2 : TV equipped with an HDMI connector and incompatible with the ARC (Audio Return Channel) / eARC (Enhanced Audio Return Channel)”...
Page 23 Contents Connections Playback Settings Tips Appendix Remote control unit A Input source select buttons These selects the input source. (v p. 48) B Channel/page search buttons (CH/PAGE df) These switch pages. (v p. 62) C MUTE button (:) This mutes the output audio. (v p. 49) D Information button (INFO) This displays the status information on the TV screen.
Page 24 Contents Connections Playback Settings Tips Appendix F BACK button This returns to the previous screen. G System buttons These perform playback related operations. H QUICK SELECT buttons (1 – 4) These call up settings registered to each button, such as input source, volume level and sound mode settings.
Page 25 Contents Connections Playback Settings Tips Appendix L POWER button (X) This turns the power on/off. (v p. 48) M ECO Mode button (G) This switches to ECO Mode. (v p. 161) N VOLUME buttons (df) These adjusts the volume level. (v p. 49) O OPTION button This displays the option menu on the TV screen.
Page 26 Contents Connections Playback Settings Tips Appendix o Contents o Cables used for connections Provide necessary cables according to the devices you want to Speaker installation connect. Connecting speakers Connecting a TV Speaker cable Connecting a playback device Connecting a USB memory device to the USB port Connecting to a home network (LAN) Subwoofer cable Connecting the power cord...
Page 27 Contents Connections Playback Settings Tips Appendix Speaker installation Determine the speaker system depending on the number of speakers you Place the FRONT left and right speakers an are using and install each speaker and subwoofer in the room. FL/FR equal distance from the main listening position. Speaker installation is explained using this example of a typical (Front speaker left/ The distance between each speaker and your TV...
Page 28 Contents Connections Playback Settings Tips Appendix o When 5.1-channel speakers are installed 0 Use the illustration below as a guide for how high each speaker should be installed. The height does not need to be exactly the same. Surround speaker SW C 60 –...
Page 29 Contents Connections Playback Settings Tips Appendix Connecting speakers Here we connect the speakers in the room to this unit. Before connecting speakers NOTE NOTE 0 Disconnect this unit’s power plug from the power outlet before connecting the 0 Carry out the following settings when using a speaker with an impedance of 4 – 6 speakers.
Page 30 Contents Connections Playback Settings Tips Appendix o Connecting the speaker cables o Connecting the subwoofer Carefully check the left (L) and right (R) channels and + (red) and – Use a subwoofer cable to connect the subwoofer. Two subwoofers can (black) polarities on the speakers being connected to this unit, and be be connected to this unit.
Page 31 Contents Connections Playback Settings Tips Appendix o About the cable labels (supplied) for channel Attach the cable label for each channel to its speaker cable as shown in the diagram. identification Refer to the table and attach the label to each speaker cable. The channel display section for speaker terminals on the rear panel is Then, make connection so that the color of the speaker terminal color-coded for each channel to be identifiable.
Page 32 Contents Connections Playback Settings Tips Appendix Standard connection This serves as a basic 5.1-channel surround system. Front panel Display Rear panel Remote Index...
Page 33 Contents Connections Playback Settings Tips Appendix Connecting a TV Connect a TV to this unit so that the input video is output to the TV. You can also enjoy audio from the TV on this unit. How to connect a TV depends on the connectors and functions equipped on the TV. ARC (Audio Return Channel) / eARC (Enhanced Audio Return Channel) function plays TV audio on this unit by sending the TV audio signal to this unit via HDMI cable.
Page 34 Contents Connections Playback Settings Tips Appendix Connection 1 : TV equipped with an HDMI connector and compatible with the ARC (Audio Return Channel) / eARC (Enhanced Audio Return Channel) Use an HDMI cable to connect a TV that is compatible with the ARC / eARC function to this unit. Set “HDMI Control”...
Page 35 Contents Connections Playback Settings Tips Appendix Connection 2 : TV equipped with an HDMI connector and incompatible with the ARC (Audio Return Channel) / eARC (Enhanced Audio Return Channel) Use an HDMI cable to connect the TV to this unit. To listen to audio from TV on this unit, use an optical cable to connect the TV to this unit.
Page 36 Contents Connections Playback Settings Tips Appendix Connection 3 : TV equipped without an HDMI connector Use a video cable to connect the TV to this unit. To listen to audio from TV on this unit, use an optical cable to connect the TV to this unit. VIDEO OPTICAL Front panel...
Page 37 Contents Connections Playback Settings Tips Appendix Connecting a playback device This unit is equipped with two types of video input connectors (HDMI and composite video) and three types of audio input connectors (HDMI, digital audio and audio). Select input connectors on this unit according to the connectors equipped on the device you want to connect. If the device connected to this unit is equipped with an HDMI connector, it is recommended to use HDMI connections.
Page 38 Contents Connections Playback Settings Tips Appendix Connecting a set-top box (Satellite tuner/cable TV) This explanation uses the connection with a satellite tuner/cable TV STB as an example. Select the input connectors on this unit to match the connectors on the device that you want to connect to. (HDMI incompatible device) Satellite tuner / Satellite tuner /...
Page 39 Contents Connections Playback Settings Tips Appendix Connecting a media player This explanation uses the connection with a media player as an example. Select the input connectors on this unit to match the connectors on the device that you want to connect to. (HDMI incompatible device) Media player Media player...
Page 40 Contents Connections Playback Settings Tips Appendix Connecting a Blu-ray Disc player or DVD player This explanation uses the connection with a Blu-ray Disc player or DVD player as an example. Blu-ray Disc player / DVD player HDMI Front panel Display Rear panel Remote Index...
Page 41 Contents Connections Playback Settings Tips Appendix Connecting a game console or player device compatible with the 8K This unit supports 8K HDMI video signals. If your game console or player device supports 8K, connect it to the HDMI 4, HDMI 5 or HDMI 6 connector on your device. Game console 8K player HDMI...
Page 42 Contents Connections Playback Settings Tips Appendix Connecting a turntable This unit is compatible with turntables equipped with a moving magnet (MM) phono cartridge. When you connect to a turntable with a low output moving coil (MC) cartridge, use a commercially available MC head amp or a step-up transformer. If you set this unit’s input source to “Phono”...
Page 43 USB memory device 0 Denon does not guarantee that all USB memory devices will operate or receive power. When using a portable USB hard disk drive (HDD) which came with an AC adapter, use that device’s supplied AC adapter. NOTE 0 USB memory devices will not work via a USB hub.
Page 44 Contents Connections Playback Settings Tips Appendix Connecting to a home network (LAN) This unit can connect to a network using a wired LAN or wireless LAN. Wired LAN You can connect this unit to your home network (LAN) to enable various types of playback and operations as described below.
Page 45 Contents Connections Playback Settings Tips Appendix Wireless LAN 0 When using this unit, we recommend you use a router equipped with the following When connecting to a wireless LAN network, stand the rod antenna for functions: Bluetooth/wireless LAN connection upright on the rear panel. 0 Built-in DHCP server See “Wi-Fi Setup”...
Page 46 Contents Connections Playback Settings Tips Appendix Connecting the power cord After completing all the connections, insert the power plug into the power outlet. Power cord (supplied) To household power outlet (AC 230 V, 50/60 Hz) Front panel Display Rear panel Remote Index...
Page 47 Contents Connections Playback Settings Tips Appendix o Contents Playback network audio/service Listening to Internet Radio Basic operation Playing back files stored on a PC or NAS Turning the power on Getting the HEOS App Selecting the input source AirPlay function Adjusting the volume Spotify Connect function Turning off the sound temporarily (Muting)
Page 48: Input Source
Contents Connections Playback Settings Tips Appendix Basic operation Turning the power on POWER Press POWER X to turn on power to the unit. Input source 0 You can press the input source select button when the unit is in standby mode to select turn on the power.
Page 49 Contents Connections Playback Settings Tips Appendix Adjusting the volume Playback a Blu-ray Disc player/DVD player Use VOLUME df to adjust the volume. The following describes the procedure for playing Blu-ray Disc player/DVD player. 0 The variable range differs according to the input signal and channel level setting. Prepare for playback.
Page 50 Contents Connections Playback Settings Tips Appendix Playing a USB memory device Playing back music files stored on a USB memory device. Only USB memory devices conforming to mass storage class standards can be played on this unit. This unit is compatible with USB memory devices in “FAT32” or “NTFS” format.
Page 51 Contents Connections Playback Settings Tips Appendix Playing files stored on USB memory Browse the music on your USB memory device and devices select something to play. Insert a “FAT32” or “NTFS” formatted USB memory 0 When you select something to play you will be asked how you want to device into the USB port.
Page 52 Nature 01 - Various Artists 2:45 -2:21 0 Note that Denon will accept no responsibility whatsoever for any problems arising with the data on a USB memory device when using this unit in conjunction with the USB memory device. 0 When a USB memory device is connected to this unit, the unit loads all of the files on the USB memory device.
Page 53 Contents Connections Playback Settings Tips Appendix o Operations accessible through the option menu “Adjusting the audibility of dialog and vocals (Dialog Enhancer)” (v p. 82) “Adjusting the volume of each channel to match the input source (Channel Level Adjust)” (v p. 83) “Adjusting the tone (Tone)”...
Page 54 Contents Connections Playback Settings Tips Appendix Listening to music on a Bluetooth device Music files stored on Bluetooth devices such as smartphones, digital music players, etc. can be enjoyed on this unit by pairing and connecting this unit with the Bluetooth device. POWER X Communication is possible up to a range of about 30 m.
Page 55 Contents Connections Playback Settings Tips Appendix Playing music from Bluetooth device Select this unit when its name appears in the list of devices displayed on the screen of the Bluetooth In order to enjoy music from a Bluetooth device on this unit, the Bluetooth device.
Page 56 Contents Connections Playback Settings Tips Appendix Pairing with other Bluetooth devices NOTE 0 To operate the Bluetooth device with the remote control of this unit, the Bluetooth Pair a Bluetooth device with this unit. device needs to support the AVRCP profile. 0 The remote control of this unit is not guaranteed to work with all Bluetooth devices.
Page 57 Contents Connections Playback Settings Tips Appendix Reconnecting to this unit from a Bluetooth device After pairing is completed, the Bluetooth device can be connected without performing any operations on this unit. This operation also needs to be performed when switching the Bluetooth device for playback.
Page 58 Contents Connections Playback Settings Tips Appendix Listening to audio on Bluetooth headphones You can listen to audio playing through the MAIN ZONE of this unit on Bluetooth headphones. Output audio from connected speakers and Bluetooth headphones simultaneously, or only using Bluetooth headphones. (Output Mode: Bluetooth + Speakers) (Output Mode: Bluetooth Only) Front panel...
Page 59 Contents Connections Playback Settings Tips Appendix Listening to audio on Bluetooth headphones 0 “Output Mode” can also be set from “Bluetooth Transmitter” in the option menu. 0 A2DP profile-compatible Bluetooth speakers can be connected following the same steps used to connect Bluetooth headphones. Set “Transmitter”...
Page 60 Contents Connections Playback Settings Tips Appendix Reconnecting to a Bluetooth Disconnecting Bluetooth headphones headphones Complete any of the following steps to disconnect your Bluetooth headphones: Follow any of the steps below to reconnect the most recently used Turn off your Bluetooth headphones. Bluetooth headphones: Go to “Bluetooth Transmitter”...
Page 61: Internet Radio
Contents Connections Playback Settings Tips Appendix Listening to Internet Radio Internet Radio refers to radio broadcasts distributed over the Internet. Internet Radio stations from around the world can be received. The Internet Radio station list on this unit the database service provided by TuneIn Radio service.
Page 62 Contents Connections Playback Settings Tips Appendix Listening to Internet Radio 0 The display switches between track title and radio station name etc. each time the main unit’s STATUS is pressed. Press INTERNET RADIO. You can also operate by pressing INTERNET RADIO on the main NOTE unit.
Page 63 Contents Connections Playback Settings Tips Appendix Playing back files stored on a PC or NAS This unit can play back music files and playlists (m3u, wpl) from DLNA compatible servers including PCs and NAS devices on your network. Supported file formats: For details, see “Playing back a file saved on a PC or NAS”...
Page 64 Contents Connections Playback Settings Tips Appendix Playing back files stored on a PC or Browse the music on your PC/NAS and select something to play. Use this procedure to play music files or playlists stored on DLNA files servers on your local network. 0 When you select something to play you will be asked how you want to queue up your music.
Page 65 Contents Connections Playback Settings Tips Appendix Use ui to select the “Play Now” or “Play Now & 0 The display switches between track title, artist name, and album title each time the Replace Queue”, then press ENTER. main unit’s STATUS is pressed. Playback starts.
Page 66 Contents Connections Playback Settings Tips Appendix o Operations accessible through the option menu “Adjusting the audibility of dialog and vocals (Dialog Enhancer)” (v p. 82) “Adjusting the volume of each channel to match the input source (Channel Level Adjust)” (v p. 83) “Adjusting the tone (Tone)”...
Page 67 Contents Connections Playback Settings Tips Appendix Getting the HEOS App You can use many online music streaming services from the HEOS App. Depending upon your geographical location, there are several options to choose from. Download the HEOS App for iOS or Android by searching App Store, Google Play store or Amazon Appstore for “HEOS”. Front panel Display Rear panel...
Page 68 Contents Connections Playback Settings Tips Appendix o Changing your HEOS Account HEOS Account HEOS Accounts can be registered in “HEOS Account” (v p. 160) in the Tap the “Music” tab. menu of this unit or by tapping “Music” tab - “Settings” icon in the Select the Settings icon in the upper left corner of...
Page 69 Some services may be added or discontinued from time to time based on decisions of the music service providers or others. o Selecting a room/device Tap the “Rooms” tab, and select “Denon AVC-S660H” if Rooms Music Now Playing there are multiple products with HEOS Built-in.
Page 70 Contents Connections Playback Settings Tips Appendix o Selecting the music track or station from music sources Music Tap the “Music” tab and select a music source. 0 All music services displayed may not be available in your location. Rooms Music Now Playing Front panel Display...
Page 71 Contents Connections Playback Settings Tips Appendix Browse the music to play. Album Now Playing After selecting a music track or radio station the app will Artist Album automatically change to the “Now Playing” screen. 10 Tracks,60 Mins.,2014 1 Track 1 0:20 0 When you select a music track to play you will be asked how you want to 0:50...
Page 72 Contents Connections Playback Settings Tips Appendix Listening to the same music in multiple Rooms Rooms rooms Drag one room into another to group them Drag one room into another to group them Dining Dining Song Name 1 This system is a true multi-room audio system. You can create one or Song Name 1 more HEOS groups to automatically synchronize audio playback between Living...
Page 73 Contents Connections Playback Settings Tips Appendix o Ungrouping rooms Rooms Rooms Drag one room into another to group them Drag one room into another to group them Press and hold your finger on room that you want to Dining remove from the group. Dining Song Name 1 Song Name 1...
Page 74 Contents Connections Playback Settings Tips Appendix o Grouping all rooms (party mode) Rooms Rooms You can easily group 16 rooms together into Party Mode by using a Drag one room into another to group them Drag one room into another to group them "pinch"...
Page 75 Contents Connections Playback Settings Tips Appendix o Ungrouping all rooms Rooms Rooms You can easily ungroup all of your rooms and exit Party Mode by using Drag one room into another to group them Drag one room into another to group them a "spread"...
Page 76 Contents Connections Playback Settings Tips Appendix AirPlay function Music files stored on your iPhone, iPod touch, iPad or iTunes can be Router played on this unit via the network. This unit 0 Source input will be switched to “HEOS Music” when AirPlay playback is started. 0 You can stop AirPlay playback by choosing other input source.
Page 77 Contents Connections Playback Settings Tips Appendix Playing songs from your iPhone, iPod Playing iTunes music with this unit touch or iPad Install iTunes 10, or later, on a Mac or Windows PC that If you update your “iPhone/iPod touch/iPad” to iOS 10.0.2 or later, you can is connected to the same network as this unit.
Page 78 A circle is displayed to the right of AirPlay 2 compatible devices. playback and then adjust it to a suitable level. Play a song from your iPhone, iPod iPhone Denon xxxxxxxx touch or iPad on multiple synced Speakers devices (AirPlay 2) Songs from an iPhone, iPod touch or iPad operating iOS 11.4 or later can...
Page 79 Contents Connections Playback Settings Tips Appendix Spotify Connect function Spotify is all the music you’ll ever need. Millions of songs available Playing Spotify music with this unit instantly. Just search for the music you love, or let Spotify play you something great.
Page 80 Contents Connections Playback Settings Tips Appendix Convenience functions This section explains how to use convenient functions that can be used for each input source. (HEOS Music) OPTION uio p ENTER Front panel Display Rear panel Remote Index...
Page 81 Contents Connections Playback Settings Tips Appendix Playing back HEOS Favorites Adding to HEOS Favorites Press R (HEOS Music). While content is playing, press OPTION. The option menu screen is displayed. Use ui to select “HEOS Favorites”, then press ENTER. Use ui to select “Add to HEOS Favorites”, then press ENTER.
Page 82 Contents Connections Playback Settings Tips Appendix Deleting a HEOS Favorites Adjusting the audibility of dialog and vocals (Dialog Enhancer) While the HEOS Favorites content list is displayed, use ui to select the item you want to remove from HEOS This function adjusts the center channel frequency band to enhance the Favorites, then press OPTION.
Page 83 Contents Connections Playback Settings Tips Appendix Adjusting the volume of each channel Use o p to adjust the volume. to match the input source (Channel –12.0 dB – +12.0 dB (Default: 0.0 dB) Level Adjust) Use uio p to select “Exit”, then press ENTER. The volume of each channel can be changed while listening to music.
Page 84 Contents Connections Playback Settings Tips Appendix Adjusting the tone (Tone) Select “On” in step 3 and press i to select the sound range to be adjusted. Adjusts the tonal quality of the front speakers. Bass: Adjust bass. Press OPTION. Treble: Adjust treble.
Page 85 Contents Connections Playback Settings Tips Appendix Adjusting audio delay (Audio Delay) Press i to select “Adjust” if the timing mismatch between the picture and sound need to be corrected Compensates for incorrect timing between video and audio. manually, then use o p to adjust the timing. Press OPTION.
Page 86 Contents Connections Playback Settings Tips Appendix Displaying your desired video during If you selected “On” in step 3, press i and select audio playback (Video Select) “Source”. Use o p to select the input source for video you want This unit can display video from a different source on TV during audio to play back, then press ENTER.
Page 87 Contents Connections Playback Settings Tips Appendix Selecting a sound mode This unit allows you to enjoy various kinds of surround and stereo playback modes. Disc formats such as Blu-ray Disc and DVD, as well as being supported by digital broadcasting, and even by streaming movies and music from internet-based subscription services.
Page 88 Contents Connections Playback Settings Tips Appendix o Switching the sound mode Selecting a sound mode Each time you press MOVIE, MUSIC or GAME, the sound mode changes. Press MOVIE, MUSIC or GAME to select a sound mode. While the sound mode is displayed, you can also use o p to select a sound mode.
Page 89 Contents Connections Playback Settings Tips Appendix Direct playback Auto surround playback This mode detects the type of input digital signal, and automatically Sound recorded in source is played as is. selects the corresponding mode for playback. Press PURE to select “Direct”. Perform stereo playback when the input signal is PCM.
Page 90 Contents Connections Playback Settings Tips Appendix Description of sound mode types Dolby sound mode Sound mode type Description Dolby PLg This mode can be selected when the Dolby PLg decoder is used to play back 2-channel sources in 5.1-channel surround sound with an enveloping surround sound experience.
Page 91: Original Sound Mode
Contents Connections Playback Settings Tips Appendix PCM multi-channel sound mode Sound mode type Description Multi Ch In This mode can be selected when playing multi-channel PCM sources. Original sound mode Sound mode type Description Multi Ch Stereo This mode is for enjoying stereo sound from all speakers. Rock Arena This mode simulates the expansive sound of a live concert in an arena.
Page 92 Contents Connections Playback Settings Tips Appendix Stereo sound mode Sound mode type Description Stereo This mode plays 2-channel stereo audio with no additional surround sound processing. Sound is output from the front left and right speakers, and subwoofer if connected. When multi-channel signals are inputted, they are mixed down to 2-channel audio and are played back with no additional surround sound processing.
Page 93 Contents Connections Playback Settings Tips Appendix Sound mode that can be selected for each input signal The following sound modes can be selected using the MOVIE, MUSIC and GAME buttons. Adjust the sound field effect with the menu “Surr.Parameter” to enjoy surround sound the way you like it. (v p. 112) Input signal MUSIC button Sound mode...
Page 94 Contents Connections Playback Settings Tips Appendix Sound mode MOVIE button MUSIC button GAME button Input signal Multi-channel z3 Stereo Dolby Digital Dolby Digital Dolby TrueHD Dolby TrueHD Dolby Digital Plus Dolby Digital Plus DTS Surround DTS 96/24 DTS-HD HI RES DTS-HD / DTS-HD MSTR DTS Express...
Page 95 Contents Connections Playback Settings Tips Appendix o Views on the display A Shows a decoder to be used. A Dolby Digital Plus decoder is displayed as “X”. B Shows the name of the input source being played back. Front panel Display Rear panel Remote...
Page 96 Contents Connections Playback Settings Tips Appendix HDMI Control function A recent addition to the HDMI standard is CEC (Consumer Electronics Control), which allows control signals from one device to communicate with another device via the HDMI cable connection. Setting procedure Enable the HDMI Control function of this unit.
Page 97 Contents Connections Playback Settings Tips Appendix Sleep timer function You can have the power automatically switched to standby once a set time has elapsed. This is convenient for viewing and listening while going to sleep. SLEEP 0 The sleep timer can be set by pressing SLEEP on the main unit. Front panel Display Rear panel...
Page 98 Contents Connections Playback Settings Tips Appendix o Checking the remaining time Using the sleep timer Press SLEEP when the sleep timer is in operation. The remaining time appears on the display. Press SLEEP and display the time you want to set. o To cancel the sleep timer The SLEEP indicator lights up on the display and the sleep timer starts.
Page 99 Contents Connections Playback Settings Tips Appendix Quick select plus function Settings such as the input source, volume level and sound mode can be registered to the QUICK SELECT 1 - 4 buttons. You can simply press one of the registered QUICK SELECT buttons in subsequent playbacks to switch to the group of saved settings in a batch.
Page 100 Contents Connections Playback Settings Tips Appendix Calling up the settings Press QUICK SELECT. The Quick Select settings registered to the button you pressed are called up. The default settings for the input source are as shown below. Button Input source QUICK SELECT 1 CBL/SAT QUICK SELECT 2...
Page 101 Contents Connections Playback Settings Tips Appendix Changing the settings Press and hold the desired QUICK SELECT until “Quickz Memory” appears on the display. The current settings will be memorized. Set the items below to the settings you want to register. z is displayed the number for the QUICK SELECT button you pressed.
Page 102 Contents Connections Playback Settings Tips Appendix Panel lock function To prevent accidental operation of this unit, you can disable operation of Disabling all key button operations the buttons on the front panel. CURSOR UP Press X while you press and hold CURSOR DOWN and ENTER with the unit in standby mode.
Page 103: Remote Control Unit
Contents Connections Playback Settings Tips Appendix Canceling the Panel lock function Press X while you press and hold CURSOR DOWN and ENTER with the unit in standby mode. Use CURSOR UP or CURSOR DOWN to select “FP LOCK zOff”. (z The currently set mode.) Press ENTER to enter the setting.
Page 104 Contents Connections Playback Settings Tips Appendix Remote lock function When connecting an IR receiver, enable the Remote lock function. When Disabling the sensor function of the the function is enabled, you can not perform operations with the remote remote control unit control unit.
Page 105 Router This unit Switch the “Network Control” setting to “Always On”. (v p. 157) Check the IP address of this unit with “Information”. (v p. 153) Information Friendly Name Denon AVC-S660H Connection Wired(Ethernet) DHCP IP Address 192.168.100.19 MAC Address zzzzzz-000000...
Page 106 Contents Connections Playback Settings Tips Appendix Enter the IP address of this unit in browser’s address box. For example, if the IP address of this unit is “192.168.100.19”, enter “http://192.168.100.19”. http://192.168.100.19 File Edit View Favorites Tools Help When the top menu is displayed on the web browser, click on the menu item you want to operate.
Page 107 Contents Connections Playback Settings Tips Appendix Menu map When using menu operations, connect this unit to a TV and operate this unit while viewing the TV. The recommended settings are configured for this unit by default. You can customize this unit based on your existing system and your preferences. Setting items Detailed items Description...
Page 108 Contents Connections Playback Settings Tips Appendix Setting items Detailed items Description Page Input Assign Changes input connector assignment and the audio input mode. Source Rename Changes the display name for input source. Hide Sources Removes from the display input sources that are not used. Source Level Adjusts the playback level of the audio input.
Page 109 Contents Connections Playback Settings Tips Appendix Setting items Detailed items Description Page 【When the user is signed out the HEOS Account】 I have a HEOS Account Selects to sign in. Create Account Creates new HEOS Account. Forgot Password If you forgot your password, we'll send you an email with instructions about how to reset HEOS Account 【When the user is signed in the HEOS Account】...
Page 110 Information Shows information about this unit settings, input signals, etc. Usage Data Selects whether or not to send anonymous usage data to Denon. Save & Load Save and restore device settings by using a USB memory device. Setup Lock Protects settings from inadvertent changes.
Page 111 Contents Connections Playback Settings Tips Appendix Menu operations Press SETUP. The menu is displayed on the TV screen. Use ui p to select the menu to be set or operated, then press ENTER. Use o p to change to desired setting. Press ENTER to enter the setting.
Page 112 Contents Connections Playback Settings Tips Appendix Audio Make audio-related settings. Subwoofer Level Surr.Parameter Adjusts the subwoofer channel volume for all input sources. You can adjust the surround audio sound field effects to match your preferences. The items (parameters) that can be adjusted depend on the signal being o Subwoofer input and the currently set sound mode.
Page 113 Contents Connections Playback Settings Tips Appendix o Loudness Mngmt o Dynamic Comp. This sets whether to output as specified in “Dynamic Comp.” or output Compress dynamic range (difference between loud and soft sounds). directly without compressing the dynamic range of audio recorded in Automatic dynamic range compression the disc.
Page 114 Contents Connections Playback Settings Tips Appendix o Low Frequency o Center Image Adjust the low frequency effects level (LFE). Distributes the dialogue output from the center channel to the front left and right channels and widens the sound image in the front. -10 dB –...
Page 115 Contents Connections Playback Settings Tips Appendix o Dimension o Delay Time Shift sound image center to front or rear to adjust playback balance. Adjust the audio delay time against video to extend the sound field image. 0 – 6 (Default : 3) 0 ms –...
Page 116 Contents Connections Playback Settings Tips Appendix o Room Size o Subwoofer Determine size of acoustic environment. Turn subwoofer output on and off. Small: Simulate acoustics of a small room. The subwoofer is used. (Default): Simulate acoustics of a medium-small Medium small: room.
Page 117 Contents Connections Playback Settings Tips Appendix Restorer 0 This item can be set with analog signals or PCM signal (Sample Rate = Compressed audio formats such as MP3, WMA (Windows Media Audio) 44.1/48 kHz) is input. and MPEG-4 AAC reduce the amount of data by eliminating signal 0 This cannot be set when the sound mode is set to “Direct”.
Page 118 Contents Connections Playback Settings Tips Appendix o Power On Level Volume Define the volume setting that is active when the power is turned on. Set the volume setting. Last Use the memorized setting from the last o Scale (Default) : session.
Page 119 Contents Connections Playback Settings Tips Appendix o MultEQ ® Audyssey ® MultEQ ® compensates for both time and frequency characteristics of Set Audyssey MultEQ , Audyssey Dynamic EQ and Audyssey Dynamic ® ® the listening area based on “Audyssey ® Setup”...
Page 120 Contents Connections Playback Settings Tips Appendix o Dynamic EQ o Ref.Lev.Offset Solves the problem of deteriorating sound quality as volume is Audyssey Dynamic EQ ® is referenced to the standard film mix level. It decreased by taking into account human perception and room makes adjustments to maintain the reference response and surround acoustics.
Page 121 Contents Connections Playback Settings Tips Appendix o Dynamic Volume Manual EQ Solves the problem of large variations in volume level between TV, Uses the graphic equalizer to adjust the tone of each speaker. movies and other content (between quiet passages and loud passages, etc.) by automatically adjusting to the user’s preferred volume setting.
Page 122 Contents Connections Playback Settings Tips Appendix o Speaker Select o Adjust EQ Select whether to adjust tones for individual speakers or for all Adjust tonal balance for each frequency band. speakers. 1. Select the speaker. All: Adjust all speaker tones together. 2.
Page 123 Contents Connections Playback Settings Tips Appendix o Curve Copy Copy the Flat correction curve created in Audyssey ® Setup. 0 “Curve Copy” is displayed after Audyssey ® Setup has been performed. 0 “Curve Copy” cannot be used when using headphones. o Set Defaults The “Manual EQ”...
Page 124 Contents Connections Playback Settings Tips Appendix Video Make video-related settings. o HDMI Audio Out HDMI Setup Select HDMI audio output device. Make settings for HDMI Audio Out, HDMI Pass Through and HDMI Play back through speakers connected to Control settings. (Default): the unit.
Page 125 Contents Connections Playback Settings Tips Appendix o HDMI PassThrough o RC Select Selects how this unit will transmit HDMI signals to the HDMI output in Set whether to allow this unit to be turned on by the input source select standby power mode.
Page 126 Contents Connections Playback Settings Tips Appendix o HDMI Control o ARC You can link operations with devices connected to HDMI and On the TV connected to the HDMI MONITOR connector, set whether compatible with HDMI Control. to receive sound from the TV via HDMI. Use HDMI Control function.
Page 127 Contents Connections Playback Settings Tips Appendix o TV Audio Switching o Pow.Off Control Sets automatic switching to the “TV Audio” input when a TV connected Links the power standby of this unit to external devices. via HDMI sends an appropriate CEC control command to this unit. If power to a connected TV is turned off independently of the input source, power Select the “TV Audio”...
Page 128 Contents Connections Playback Settings Tips Appendix o Power Saving HDMI Upscaler If “TV Speaker” is set as the audio output setting of your TV, this unit is Sets the mode for upscaling 1080p and 4K HDMI content to 8K. automatically set to standby mode to reduce power consumption. Upscale 1080p and 4K HDMI video to 8K This function is activated in the following cases.
Page 129 Contents Connections Playback Settings Tips Appendix o Now Playing On Screen Disp. Sets the display time for the playback display when the input source is Select the on-screen display user interface preferences. “HEOS Music”. o Volume Always On Show display continuously. (Default) : Sets where to display the volume level.
Page 130 Contents Connections Playback Settings Tips Appendix Screensaver 4K/8K Signal Format Select the screen saver setting. Set the format of 4K and 8K signal to be played back by this unit when the TV or playback device connected to this unit is HDMI 4K or 8K signal A screen saver is activated if no operation is performed for more than 5 compatible.
Page 131 Contents Connections Playback Settings Tips Appendix GRelation between the “4K/8K Signal Format” setting and supported resolutionsH 0 When setting this to “Enhanced”, we recommend using a “Premium High 4K/8K Signal Format Support Color Pixel Speed HDMI Cable” or “Premium High Speed HDMI Cable with Ethernet” that has an “HDMI Premium Certified Cable”...
Page 132 Contents Connections Playback Settings Tips Appendix HDCP Setup TV Format Sets the HDCP version for each HDMI input source. Set the video signal format to be output for the TV you are using. Video may not be output depending on the HDCP version of your player o Format and the TV.
Page 133 Contents Connections Playback Settings Tips Appendix Inputs Perform settings related to input source playback. You do not have to change the settings to use the unit. Make settings when needed. Input Assign 0 By default, each item is set as follows. By making connections as indicated by the input sources printed on the Input connector INPUT...
Page 134 Contents Connections Playback Settings Tips Appendix n TV set top box/satellite users please note o DIGITAL When using the digital audio output on a TV/satellite box: Set this to change the digital audio input connectors assigned to the To play the video signal assigned to “HDMI” combined with the audio input sources.
Page 135 Contents Connections Playback Settings Tips Appendix o INPUT MODE o Set Defaults Set the audio input modes for each input source. The “Input Assign” settings are returned to the default settings. It is normally recommended to set the audio input mode to “AUTO”. AUTO Automatically detect input signal and (Default):...
Page 136 Contents Connections Playback Settings Tips Appendix Source Rename Hide Sources Changes the display name of the input source. Remove from the display input sources that are not used. Once changed, the name is displayed on the display and menu screens Show Use this source.
Page 137 Contents Connections Playback Settings Tips Appendix Speakers The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called “Audyssey ® Setup”. You do not have to perform Audyssey Setup when you have already performed “Sp.Calibration” in “Setup Assistant”. ®...
Page 138 Contents Connections Playback Settings Tips Appendix o About the main listening position NOTE The main listening position is the position where listeners would 0 Make the room as quiet as possible. Background noise can disrupt the room measurements. Close windows and turn off the power on electronic devices normally sit or where one would normally sit alone within the listening (radios, air conditioners, fluorescent lights, etc.).
Page 139 Contents Connections Playback Settings Tips Appendix Procedure for speaker settings Attach the Sound calibration microphone to the supplied microphone stand or own tripod and install it (Audyssey Setup) ® at the main listening position. When installing the Sound calibration microphone, point the tip of Preparation the microphone toward the ceiling and adjust the height to match the height of the ears of a listener in a seated position.
Page 140 Contents Connections Playback Settings Tips Appendix Connect the Sound calibration microphone to the Select “Next”, then press ENTER. SETUP MIC jack of this unit. Audyssey Setup Set the following items if necessary. Channel Select When the Sound calibration microphone is Start connected, the following screen is displayed.
Page 141 Contents Connections Playback Settings Tips Appendix Follow the instructions on the screen display and press When the detected speaker is displayed, select “Next” “Next” to proceed further. and then press ENTER. When the following screen is displayed, select “Begin Test” and then press ENTER. Audyssey Setup Speaker Detection Start the measurement of the first position.
Page 142 Contents Connections Playback Settings Tips Appendix Move the Sound calibration microphone to position 2, Repeat step 9, measuring positions 3 to 6. select “Continue”, then press ENTER. The measurement of the second position starts. Measurements can be made in up to six positions. 0 To skip measuring the fourth and subsequent listening position, press o to select “Complete”...
Page 143 Contents Connections Playback Settings Tips Appendix Perform the settings for Audyssey Dynamic EQ ® Dynamic EQ corrects the frequency response in consideration of Audyssey Dynamic Volume ® the audio characteristics of the room and human hearing ability so that sound can be heard even at low volume. The following screen is displayed during the analysis.
Page 144 Contents Connections Playback Settings Tips Appendix When the analysis and storage ends, unplug the Sound Select “Details” and press ENTER to verify the calibration microphone from the SETUP MIC jack on the measurement results. main unit and then press “Next”. Subwoofers may measure a greater reported distance than the actual distance due to added electrical delay common in subwoofers.
Page 145 Contents Connections Playback Settings Tips Appendix Error messages An error message is displayed if Audyssey ® Setup could not be completed due to speaker placement, the measurement environment, etc. If an error message is displayed, check the relevant items and perform the necessary measures. Be sure to turn off the power before checking speaker connections. Examples Error details Measures...
Page 146 Contents Connections Playback Settings Tips Appendix Retrieving Audyssey ® Setup settings If you set “Restore...” to “Restore”, you can return to Audyssey Setup ® measurement result (value calculated at the start by MultEQ ) even when ® you have changed each setting manually. Audyssey Setup Set the following items if necessary.
Page 147 Contents Connections Playback Settings Tips Appendix Manual Setup Speaker Config. Perform when setting the speakers manually or when changing settings Select whether or not speakers are present, playback capacity for low bass frequencies and speaker size. made in Audyssey ® Setup.
Page 148 Contents Connections Playback Settings Tips Appendix o Center o Surround Set the presence and size of the center speaker. Set the presence and size of the surround speakers. Use a large speaker that can adequately Use a large speaker that can adequately Large: Large: play back very low bass frequencies.
Page 149 Contents Connections Playback Settings Tips Appendix o Set the distance Distances 0.00 m – 18.00 m / 0.0 ft – 60.0 ft Set distance from listening position to speakers. Measure beforehand the distance from the listening position to each speaker. 0 The speakers that can be selected differ depending on the “Speaker Config.”...
Page 150 Contents Connections Playback Settings Tips Appendix Levels Set the volume of the test tone to be the same at the listening position when it is output from each speaker. o Test Tone Start A test tone is output from the selected speaker. While listening to the test tone, adjust the volume output from the selected speaker.
Page 151 Contents Connections Playback Settings Tips Appendix o Set the crossover frequency Crossovers 40 Hz / 60 Hz / 80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz / 150 Hz / Set in accordance with the lower limit frequency of the base frequencies 200 Hz / 250 Hz (Default: 80 Hz) that can be played back through each speaker.
Page 152 Contents Connections Playback Settings Tips Appendix o LPF for LFE Bass Set LFE signal playback range. Set this when you want to change the Set subwoofer and LFE signal range playback. playback frequency (low pass filter point) of the subwoofer. o Subwoofer Mode 80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz / 150 Hz / 200 Hz / 250 Hz (Default: 120 Hz)
Page 153 Contents Connections Playback Settings Tips Appendix Network To use this unit by connecting it to a home network (LAN), you must configure network settings. If you set up your home network (LAN) via DHCP, set “DHCP” to “On”. (Use the default setting.) This allows this unit to use your home network (LAN). When assigning an IP address to each device manually, you need to assign an IP address to this unit using the “IP Address”...
Page 154 2. Check that your iOS device is connected to the wireless LAN (Wi- o Scan Networks Fi) router and select “Denon AVC-S660H” from “SET UP NEW Select the network you wish to connect to from the list of possible AIRPLAY SPEAKER...” at the bottom of the Wi-Fi configuration networks shown on the TV screen.
Page 155 Contents Connections Playback Settings Tips Appendix o Manual Settings Enter the name (SSID) and password of the network you wish to Configure the IP address. connect to. If you are using a broadband router (DHCP function), the information 1. Set the following items. required for network connection such as the IP address will be automatically configured since the DHCP function is set to “On”...
Page 156 Contents Connections Playback Settings Tips Appendix o DHCP o Default Gateway Selects how to connect to the network. When connected to a gateway (router), input its IP address. Configure the network settings o DNS (Default): automatically from your router. Enter the DNS address indicated in the documentation supplied by Off: Configure the network settings manually.
Page 157 Home Theater /Living Room / Family Room / Guest Room / Kitchen / Dining Room / Master Bedroom / Bedroom / Den / 0 When using the web control function, Denon 2016 AVR Remote App or HEOS Office / Other App, use with the “Network Control”...
Page 158 Contents Connections Playback Settings Tips Appendix o Internet Access Diagnostics Checks whether this unit has access to the Internet (WAN). Used to check the network connection. o Physical Connection Failed to connect to the Internet. Check Error: the Internet connection environment or Checks the physical LAN port connection.
Page 159 Contents Connections Playback Settings Tips Appendix Wi-Fi and Bluetooth Enables/disables the Wi-Fi and Bluetooth radios. o Wi-Fi The Wi-Fi function can be stopped to prevent noise that affects the sound quality. Using a wired LAN to connect this unit to the network enables playback with a high sound quality.
Page 160 Contents Connections Playback Settings Tips Appendix HEOS Account Make HEOS Account-related settings. HEOS Account is needed in order to use HEOS Favorites. The menu displayed differs depending on the status of the HEOS Account. You have not signed in You have already signed in o I have a HEOS Account o Signed in As If you already have a HEOS Account, enter the current account name...
Page 161 Contents Connections Playback Settings Tips Appendix General Make various other settings. Language Set the language for display the menu on the TV screen. Configure the ECO Mode and auto standby mode settings. English / Deutsch / Français / Italiano / Español / Nederlands / o ECO Mode Svenska / Pусский...
Page 162 Contents Connections Playback Settings Tips Appendix Power savings are always active, regardless of volume or input signal. 0 When the unit is switching between the different power saving states in “ECO Mode: Auto”, you may notice a click noise from the inside of this unit, this is Gives you the best balance between normal.
Page 163 Contents Connections Playback Settings Tips Appendix o Pow.On Default o On Screen Disp. Set the mode to ECO when the power is on. Display the power consumption of this unit using a meter on the TV screen. The ECO Mode will be set to the previous Last setting before the power was switched Always display the meter on the TV...
Page 164 Contents Connections Playback Settings Tips Appendix o Device List Bluetooth Transmitter Available devices are displayed in the list once you start pairing mode Sets this unit's Bluetooth transmitter. on the Bluetooth headphones you want to connect. Select your Set to use Bluetooth headphones to listen to audio playing in the MAIN Bluetooth headphones from the list to pair them.
Page 165 Contents Connections Playback Settings Tips Appendix Quick Sel.Names Front Display Change the quick select name that appears on the TV screen to one you Makes settings related to the display on this unit. prefer. o Dimmer Quick Select 1 / Quick Select 2 / Quick Select 3 / Quick Select 4 Adjust the display brightness of this unit.
Page 166 Contents Connections Playback Settings Tips Appendix o Auto-Update Firmware Turns on Automatic Updates so that futures updates are automatically Checks for the latest firmware information about updates and upgrades, downloaded and installed when this unit is in standby mode. updates the firmware, and sets up the notification message display for upgrades.
Page 167 Contents Connections Playback Settings Tips Appendix o Allow Update o Upgrade Notice Enable or disable updates and upgrades for this unit. When the latest Upgrade firmware is available, a notification message is displayed on the TV screen at power on. Enables this unit to receive updates and The notification message is displayed for about 40 seconds when the (Default):...
Page 168 If the error continues, check the network environment. 0 Information regarding the “Update” function and “Add New Feature” will be announced on the Denon website each time related plans are defined. See the Denon website for details about upgrades.
Page 169 Contents Connections Playback Settings Tips Appendix o Video Information Show the HDMI input/output signals and HDMI monitor information. Show information about this unit settings, input signals, etc. HDMI Signal o Audio Resolution / HDR / Color Space / Pixel Depth / ALLM / QMS / QFT / FRL Rate Show the audio information.
Page 170 Contents Connections Playback Settings Tips Appendix o Notifications Displays and sets notifications. SOURCE Game SOUND Dolby Audio - TrueHD SIGNAL Dolby Audio - TrueHD Also, sets whether or not to display the notification when the power is turned on. Notif.Alerts Notification messages are displayed.
Page 171 Appendix Usage Data Save & Load To help us improve our products and customer service, Denon collects Save and restore device settings by using a USB memory device. anonymous information about how you use this unit (such as frequently used input sources and sound modes and speaker settings).
Page 172 Contents Connections Playback Settings Tips Appendix Setup Lock Reset Returns settings to the factory default. Protect settings from inadvertent changes. Initialization can be performed for all unit settings or for Network settings o Lock only. Turn protection on. o All Settings Turn protection off.
Page 173 Contents Connections Playback Settings Tips Appendix o Contents Troubleshooting Power does not turn on / Power is turned off Tips Operations cannot be performed through the remote control unit I want the volume not to become too loud by mistake Display on this unit shows nothing I want to keep the volume at the same level when I turn the power No sound comes out...
Page 174 Contents Connections Playback Settings Tips Appendix Tips I want the volume not to become too loud by mistake Set the volume upper limit for “Limit” in the menu beforehand. This prevents children or others from increasing the volume too much by mistake. (v p.
Page 175 Contents Connections Playback Settings Tips Appendix I want to set the optimized listening environment after changing the configuration/position of the speakers or changing a speaker to a new Perform Audyssey ® Setup. This automatically makes the optimized speaker settings for the new listening environment. (v p. 137) I want to combine a desired video with the current music Set “Video Select”...
Page 176 Contents Connections Playback Settings Tips Appendix Troubleshooting If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other devices operating properly? 0 If steps 1 to 3 above do not improve the problem, restarting the device may improve the problem.
Page 177 Contents Connections Playback Settings Tips Appendix Power does not turn on / Power is turned off Power does not turn on. Check whether the power plug is correctly inserted into the power outlet. (v p. 46) Power automatically turns off. The sleep timer is set.
Page 178 Contents Connections Playback Settings Tips Appendix Operations cannot be performed through the remote control unit Operations cannot be performed through the remote control unit. Batteries are worn out. Replace with new batteries. (v p. 9) Operate the remote control unit within a distance of about 7 m from this unit and at an angle of within 30°. (v p. 9) Remove any obstacle between this unit and the remote control unit.
Page 179 Contents Connections Playback Settings Tips Appendix No sound comes out No sound comes out of speakers. Check the connections for all devices. (v p. 29) Insert connection cables all the way in. Check that input connectors and output connectors are not reversely connected. Check cables for damage.
Page 180 Contents Connections Playback Settings Tips Appendix Desired sound does not come out The volume does not increase. The maximum volume is set too low. Set the maximum volume using “Limit” on the menu. (v p. 118) Appropriate volume correction processing is performed according to the input audio format and settings, so the volume may not reach the upper limit. The volume of Bluetooth headphones does not decrease.
Page 181 Contents Connections Playback Settings Tips Appendix No sound is produced from subwoofer. Check the subwoofer connections. Turn on the subwoofer’s power. Set “Speaker Config.” – “Subwoofer” on the menu to “Yes”. (v p. 148) When “Speaker Config.” - “Front” in the menu is set to “Large”, depending on the input signal and the sound mode, no sound may be output from the subwoofer.
Page 182 Contents Connections Playback Settings Tips Appendix “Restorer” cannot be selected. Check that an analog signal or PCM signal (Sample Rate = 44.1/48 kHz) is input. For playback of multichannel signals such as Dolby Digital or DTS surround, “Restorer” cannot be used. (v p. 117) Switch to a sound mode other than “Direct”.
Page 183 Contents Connections Playback Settings Tips Appendix Sound is interrupted or noise occurs During playback from the Internet radio or USB memory device, sound is occasionally interrupted. When the transfer speed of the USB memory device is slow, sound may occasionally be interrupted. The network communication speed is slow or the radio station is busy.
Page 184 Contents Connections Playback Settings Tips Appendix No video is shown on the TV No picture appears. Check the connections for all devices. (v p. 34) Insert connection cables all the way in. Check that input connectors and output connectors are not reversely connected. Check cables for damage.
Page 185 Contents Connections Playback Settings Tips Appendix The menu screen is not displayed on the TV The menu screen or status information screen is not displayed on the TV. The menu screen is only displayed on this unit and a TV connected with an HDMI cable. If this unit is connected to a TV using a different video output connector, operate while watching the display on this unit.
Page 186 Contents Connections Playback Settings Tips Appendix AirPlay cannot be played back The AirPlay icon is not displayed on iTunes / iPhone / iPod touch / iPad. This unit and PC / iPhone / iPod touch / iPad are not connected to the same network (LAN). Connect it to the same LAN as this unit. (v p. 44) The firmware on iTunes / iPhone / iPod touch / iPad is not compatible with AirPlay.
Page 187 Contents Connections Playback Settings Tips Appendix USB memory devices cannot be played back USB memory device is not recognized. Disconnect and reconnect the USB memory device. (v p. 43) Mass storage class compatible USB memory devices are supported. This unit does not support a connection through a USB hub. Connect the USB memory device directly to the USB port. The USB memory device must be formatted to “FAT32”...
Page 188 Contents Connections Playback Settings Tips Appendix Bluetooth cannot be played back Bluetooth devices cannot be connected to this unit. The Bluetooth function in the Bluetooth device has not been enabled. See the Owner’s Manual of the Bluetooth device to enable the Bluetooth function. Bring the Bluetooth device near to this unit.
Page 189 Contents Connections Playback Settings Tips Appendix The sound is cut off. Bring the Bluetooth device near to this unit. Remove obstructions between the Bluetooth device and this unit. To prevent electromagnetic interference, locate this unit away from microwave ovens, wireless LAN devices and other Bluetooth devices. Reconnect the Bluetooth device.
Page 190 Contents Connections Playback Settings Tips Appendix The Internet radio cannot be played back A list of broadcasting stations is not displayed. The LAN cable is not properly connected, or the network is disconnected. Check the connection status. (v p. 44) Perform the network diagnostic mode.
Page 191 Contents Connections Playback Settings Tips Appendix Music files on PC or NAS cannot be played back Files stored on a computer cannot be played. Files are stored in a non-compatible format. Record in a compatible format. (v p. 206) Files that are copyright protected cannot be played on this unit. The USB port of this unit cannot be used for connection to a computer.
Page 192 Contents Connections Playback Settings Tips Appendix Various online services cannot be played Various online services cannot be played. The online service may have been discontinued. The HDMI Control function does not work The HDMI Control function does not work. Check that “HDMI Control” in the menu is set to “On”. (v p. 126) You cannot operate devices that are not compatible with the HDMI Control function.
Page 193 Contents Connections Playback Settings Tips Appendix Cannot connect to a wireless LAN network Cannot connect to the network. The network name (SSID), password and encryption setting have not been set up correctly. Configure the network settings according to the setting details of this unit.
Page 194 Contents Connections Playback Settings Tips Appendix Update/upgrade error messages If an update/upgrade is interrupted or fails, an error message appears. Display Description Connection failed. Please check your network, then try The network connection is unstable. again. Connection to the server failed. Check your network environment and try the update again.
Page 195: Resetting Factory Settings
Contents Connections Playback Settings Tips Appendix Resetting factory settings If the indicators are incorrect or the unit cannot be operated, restarting the unit may improve the problem. We recommend restarting the unit before returning the settings to the default settings. (v p. 176) If the operations are not improved by restarting the unit, follow the steps below.
Page 196: Resetting Network Settings
Contents Connections Playback Settings Tips Appendix Resetting network settings If network contents cannot be played or the unit cannot connect to the network, restarting the unit may improve the problem. We recommend restarting the unit before returning the settings to the default settings. (v p. 176) If the operations are not improved by restarting the unit, follow the steps below.
Page 197 Contents Connections Playback Settings Tips Appendix Restoring the firmware to the factory defaults When the unit or the network functions do not work properly, operation may be improved by restoring the firmware to the factory defaults. Do this when the unit still does not work properly even after trying the steps for “Resetting factory settings” or “Resetting network settings”. (v p. 195, 196) After the firmware is restored, various settings are reset to the default settings.
Page 198 Contents Connections Playback Settings Tips Appendix About HDMI HDMI is an abbreviation of High-Definition Multimedia Interface, which is an AV digital interface that can be connected to a TV or amplifier. This unit supports input and output of 3D (3 dimensional) video signals With the HDMI connection, high definition video and high quality audio of HDMI.
Page 199 Contents Connections Playback Settings Tips Appendix Auto Lip Sync ARC (Audio Return Channel) This function can automatically correct delay between the audio and This function transmits audio signals from the TV to this unit through video. the HDMI cable and plays back the audio from the TV on this unit Use a TV that is compatible with the Auto Lip Sync function.
Page 200 Contents Connections Playback Settings Tips Appendix o Supported audio formats ALLM (Auto Low Latency Mode) This unit automatically switches to low latency mode depending on 2-channel Linear PCM 2-channel, 32 kHz – 192 kHz, 16/20/24 bit playback contents when using a combination of television and game Multi-channel Linear 7.1-channel, 32 kHz –...
Page 201 Contents Connections Playback Settings Tips Appendix Copyright protection system In order to play back digital video and audio such as BD video or DVD video via HDMI connection, both this unit and the TV or player must to support the copyright protection system known as HDCP (High- bandwidth Digital Content Protection System).
Page 202 Contents Connections Playback Settings Tips Appendix Relationship between video signals and monitor output This unit HDMI-compatible TV Video device Output Input (IN) (MONITOR OUT) Output HDMI signal HDMI signal HDMI connector HDMI connector HDMI connector HDMI connector HDMI-incompatible TV Video signal Video signal Video connector Video connector...
Page 203 Contents Connections Playback Settings Tips Appendix When “HDMI Upscaler” in the menu is set to “On”, this unit upscales the input HDMI video signal and then outputs it to the TV. (v p. 128) HDMI Output signal 1080p 1080p 1080p 480i/576i 480p/576p 720p 1080i...
Page 204 Contents Connections Playback Settings Tips Appendix Playing back a USB memory devices This unit is compatible with MP3 ID3-Tag (Ver. 2) standard. This unit can show the artwork that was embedded by using MP3 ID3-Tag Ver. 2.3 or 2.4. This unit is compatible with WMA META tags. If the image size (pixels) of an album artwork exceeds 500 ×...
Page 205 Contents Connections Playback Settings Tips Appendix Playing back a Bluetooth device o Maximum number of playable files and folder The limits on the number of folders and files that can be displayed by This unit supports the following Bluetooth profile. this unit are as follows.
Page 206 Contents Connections Playback Settings Tips Appendix Playing back a file saved on a PC or NAS This unit is compatible with MP3 ID3-Tag (Ver. 2) standard. This unit can show the artwork that was embedded by using MP3 ID3-Tag Ver. 2.3 or 2.4. This unit is compatible with WMA META tags.
Page 207 Contents Connections Playback Settings Tips Appendix Playing back Internet Radio Personal memory plus function The most recently used settings (input mode, HDMI output mode, sound o Playable broadcast station specifications mode, tone control, channel level, MultEQ ® , Dynamic EQ, Dynamic Volume, Restorer and audio delay, etc.) are saved for each input source.
Page 208 Contents Connections Playback Settings Tips Appendix Sound modes and channel output S This indicates the audio output channels or surround parameters that can be set. D This indicates the audio output channels. The output channels depend on the settings of “Speaker Config.”. (v p. 147) Channel output Sound mode Front L/R...
Page 209 Contents Connections Playback Settings Tips Appendix Sound modes and surround parameters Surround Parameter Loudness Dynamic Dolby Pro Logic Music mode only Sound mode Cinema EQ Comp. Room Size Mngmt Frequency Delay Time Panorama Dimension Center Width Direct (2-channel) Direct (Multi-channel) Stereo Multi Ch In Dolby Pro Logic g...
Page 210: Restorer
Contents Connections Playback Settings Tips Appendix Surround Parameter Audyssey Tone Subwoofer Restorer DTS Neo:6 Music mode Dynamic Sound mode Dialog Level MultEQ ® Dynamic EQ only Level Volume z5z6 Center Image Direct (2-channel) Direct (Multi-channel) Sz10 Stereo Multi Ch In Dolby Pro Logic g DTS Neo:6 Dolby Digital...
Page 211 Contents Connections Playback Settings Tips Appendix z1 This item can be selected when a Dolby TrueHD signal is played. z2 This item can be selected when a Dolby Digital, Dolby Digital Plus, Dolby TrueHD or DTS signal is played. z3 This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played. z4 This item cannot be set when “Dynamic EQ”...
Page 212: Sound Mode
Contents Connections Playback Settings Tips Appendix Types of input signals, and corresponding sound modes F This indicates the default sound mode. S This indicates the selectable sound mode. 2-channel signal Multi-channel signal Dolby Dolby Dolby Sound mode NOTE Analog / DTS ES DTS ES Dolby...
Page 213 Contents Connections Playback Settings Tips Appendix 2-channel signal Multi-channel signal Dolby Dolby Dolby Sound mode NOTE Analog / DTS ES DTS ES Dolby Dolby Digital DTS-HD Digital Digital (-HD) Multi Express Dscrt6.1 Mtrx6.1 TrueHD Digital (+/HD) Plus (EX) Original sound mode Multi Ch Stereo Rock Arena Jazz Club...
Page 214 Contents Connections Playback Settings Tips Appendix z1 The “Cinema” mode or “Music” mode can be selected. z2 The “Movie” mode, “Music” mode or “Game” mode can be selected. z3 This item can be selected when the input signal is DTS-HD Master Audio. z4 This item can be selected when the input signal is DTS-HD Hi Resolution.
Page 215 Contents Connections Playback Settings Tips Appendix Explanation of terms o Audyssey Audyssey MultEQ ® Audyssey MultEQ ® is a room equalization solution that calibrates any Audyssey Dynamic EQ ® audio system so that it can achieve optimum performance for every Audyssey Dynamic EQ ®...
Page 216 Contents Connections Playback Settings Tips Appendix o DTS Dolby Digital Plus Dolby Digital Plus is an improved Dolby Digital signal format that is compatible with up to 7.1-channels of discrete digital sound and also This is an abbreviation of Digital Theater System, which is a digital audio improves sound quality thanks to extra data bit rate performance.
Page 217 Contents Connections Playback Settings Tips Appendix DTS-HD DTS Neo:6™ Surround This audio technology provides higher sound quality and enhanced DTS Neo:6™ is a matrix decoding technology for achieving 6.1-channel functionality than the conventional DTS and is adopted as an optional surround playback with 2-channel sources.
Page 218 Contents Connections Playback Settings Tips Appendix o Audio THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED Apple Lossless Audio Codec WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A This is a codec for lossless audio compression method developed by PARTICULAR PURPOSE ARE DISCLAIMED.
Page 219 Contents Connections Playback Settings Tips Appendix MPEG (Moving Picture Experts Group), MPEG-2, MPEG-4 Speaker impedance These are the names for digital compression format standards used for This is an AC resistance value, indicated in Ω (ohms). the encoding of video and audio. Video standards include “MPEG-1 Greater power can be obtained when this value is smaller.
Page 220 Contents Connections Playback Settings Tips Appendix o Video WPA (Wi-Fi Protected Access) This is a security standard established by the Wi-Fi Alliance. In addition to Progressive (sequential scanning) the conventional SSID (network name) and WEP key (network key), it also This is a scanning system of the video signal that displays 1 frame of video uses a user identification function and encrypting protocol for stronger as one image.
Page 221 Contents Connections Playback Settings Tips Appendix o Others WPA3-Personal WPA3-Personal replaces the WPA2-Personal Pre-Shared Key (PSK) HDCP authentication with Simultaneous authentication of equals (SAE). Unlike When transmitting digital signals between devices, this copyright PSK, SAE is resistant to offline dictionary attacks. protection technology encrypts the signals to prevent content from being Network Names (SSID: Service Set Identifier) copied without authorization.
Page 222 Contents Connections Playback Settings Tips Appendix Trademark information The Bluetooth word mark and logos are registered trademarks owned ® by the Bluetooth SIG, Inc. and any use of such marks by D&M Holdings Apple, AirPlay, iPad, iPad Air, iPad Pro and iPhone are trademarks of Inc.
Page 223 Contents Connections Playback Settings Tips Appendix For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, DTS-HD, and the DTS-HD logo are registered trademarks or trademarks of DTS, Inc. in the United States The Wi-Fi CERTIFIED logo is a registered trademark of the Wi-Fi and other countries.
Page 224 Contents Connections Playback Settings Tips Appendix Specifications o Audio section Power amplifier Rated output: Front: 75 W + 75 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.) 100 W + 100 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Center: 75 W (8 Ω/ohms, 20 Hz –...
Page 225 Contents Connections Playback Settings Tips Appendix Analog Input sensitivity: 200 mV Frequency response: 10 Hz – 100 kHz — +1, –3 dB (Direct mode) S/N: 98 dB (IHF–A weighted, Direct mode) Phono equalizer Input sensitivity: 2.5 mV RIAA deviation: ±1 dB (20 Hz to 20 kHz) S/N: 74 dB (IHF-A) Distortion factor:...
Page 226 Contents Connections Playback Settings Tips Appendix o Wireless LAN section Network type (wireless LAN standard): Conforming to IEEE 802.11a/b/g/n/ac (Wi-Fi ® compliant) Security: WEP 64 bit, WEP 128 bit WPA/WPA2-PSK (AES) WPA/WPA2-PSK (TKIP) WPA3-SAE (AES) Used frequency range: 2.4 GHz, 5 GHz z1 The Wi-Fi ®...
Page 227 Contents Connections Playback Settings Tips Appendix o General Operating temperature: 5 °C - 35 °C Power supply: AC 230 V, 50/60 Hz Power consumption: 340 W Power consumption in standby modes: Setting items in the menu HDMI PassThrough Power Standby modes Network Control Wi-Fi and Bluetooth Allow Update...
Page 228 Contents Connections Playback Settings Tips Appendix Dimensions (Unit : mm) Weight : 7.8 kg Front panel Display Rear panel Remote Index...
Page 229 Contents Connections Playback Settings Tips Appendix Index Bluetooth device ..........55 ECO Mode ........... 161 Blu-ray Disc player ........40, 49 v Numerics 3D ..............198 Firmware Update .......... 166 4K/8K ............198 Cable TV ............38 Front panel ............. 15 5.1-channel ..........
Page 230: Table Of Contents
Contents Connections Playback Settings Tips Appendix Input Assign ..........133 NAS ............... 63 Rear panel ............20 Input settings ........108, 133 Network settings ........108, 153 Remote control unit ........23 Input signal ........... 212 Resetting factory settings ......195 Input source ...........
Page 231 Contents Connections Playback Settings Tips Appendix Tips .............. 174 Web control ..........105 Troubleshooting ........... 176 Wi-Fi settings ..........154 TV ............34, 35, 36 Wired LAN ..........44, 153 Wireless LAN ......... 45, 154 USB memory device ........ 43, 50 Video Select ...........

Denon AVC-S660H Owner's Manual

Quick Links

Related Manuals for Denon AVC-S660H

Summary of Contents for Denon AVC-S660H

Table of Contents