Connecting Equipment With Hdmi Connectors - Denon AVP-A1HDE Owner's Manual

Operations
1
Connect AVP-A1HD and POA-A1HD with the control
link cable.
b The control link cable is included with the POA-A1HD.
b AVP-A1HD can be connected and control to up to 2 POA-A1HD
units.
Refer to the POA-A1HD user's manual for how to connect.
2
Set the POA-A1HD's control selector switch to
"AVP".
3
Set the POA-A1HD's mode select switch according to
the number of POA-A1HD units you are connecting.
When connecting 1 unit : "1"
When connecting 2 units : 1st unit "1", 2nd unit "2"
b Refer to the POA-A1HD owner's manual for details.
4
Switch the AVP-A1HD and POA-A1HD power on.
5
Depending on the number of POA-A1HD units to be
connected, set GUI menu "Option Setup" – "POA
Setting" – "POA LINK" to either "ON (Single)" or
"ON (Dual)" ( page 40).
v
6
Use GUI menu "Option Setup" – "POA Setting"
– "LINK Check" to check the connection.

Connecting Equipment with HDMI
connectors
With HDMI connections, the video and audio signals can be transferred
with a single cable.
DVD
Monitor
player
• By default, HDMI sound is output from the speaker of the power
amp connected to AVP-A1HD.
• To output the sound from the TV, make the settings at GUI menu
"Manual Setup" – "HDMI Setup" – "Audio" – "TV" (vpage 31).
b The AVP-A1HD is supported to the feature of HDMI listed below.
• 30 and 36 bit Deep Color
• xvYCC
• Auto Lipsync Correction
Compatible audio
Details
format
2ch 32-192 kHz
2-channel linear PCM
16/20/24 bits
Multi-channel linear 8ch 32-192 kHz
PCM 16/20/24 bits
Dolby Digital, DTS Bitstream
2/5.1ch
DSD 2.8224 MHz
1 bit
Dolby Digital Plus,
Dolby TrueHD, Bitstream
DTS-HD
Copyright protection system (HDCP)
In order to play the digital video and audio signals of a DVD- Video or
DVD-Audio disc using HDMI/DVI connections, both the connected
DVD player and monitor must be equipped for a copyright protection
system called "HDCP" (High-bandwidth Digital Content Protection).
HDCP is a copy protection technology consisting of data encoding
and mutual identification of the devices.
The AVP-A1HD is HDCP-compatible. For details on the DVD player or
monitor you are using, refer to its operating instructions.
When connecting with an HDMI/DVI converter cable
(adapter)
• HDMI video signals are theoretically compatible with the DVI
format.
When connecting to a monitor, etc., equipped with a DVI-D
connector, connection is possible using an HDMI/DVI converter
cable, but depending on the combination of components in some
cases the video signals will not be output.
• When connecting using an HDMI/DVI converter adapter, the video
signals may not be output properly due to poor connections with
the connected cable, etc.
Discs
(examples)
CD, DVD-Video,
DVD-Audio
DVD-Audio
DVD-Video
SACD
HD DVD,
Blu-ray Disc