Table of Contents
Advertisement
Remote Control Unit Operations
Main Remote Control Unit
• On the main remote control unit, the display switches according
to the device being operated and the mode.
• In modes other than iPod, the mode switches between"
and "
" each time the [MODE SELECTOR] is pressed.
• In the AMP , NET/DTU (
) and iPod modes, when the remote
ID is set, the AVP-A1HD can be used independently even in an
environment containing multiple DENON amplifiers.
Signal transmission
indicator
[
AMP]
[MODE SELECTOR]
[HOME]
[NUMBER]
[RC SETUP]
Depending on the model and year of manufacture of your equipment,
some buttons may not operate.
NOTE
The device mode ("
" or "
") cannot be changed while the
setting is being made.
Operating DENON Audio Components
1
[MODE SELECTOR]
Press
for the component to be
operated.
The indicator for the component to be operated flashes.
: AMP / ZONE2 / ZONE3 / ZONE4 /
SYSTEM CALL
: TUNER (FM/AM)
: NETWORK/USB /
"
DIGITAL TUNER
: Satellite Receiver / Cable TV
[AMP]
b The mode switches each time
GAMP modeH
GZONE2 modeH
GSYSTEM CALL modeH
2
Operate the component.
b For details, refer to the component's operating instructions.
[HOME]
is used to return to the AMP mode (AMP , ZONE2, ZONE3,
ZONE4 or SYSTEM CALL) when in any mode other than AMP .
Presetting
The included main remote control unit can be preset to operate
devices of various brands.
1
[MODE SELECTOR]
Press
preset.
: iPod
2
Press and hold in
: DVD player (recorder) /
CD player (recorder)
The signal transmission indicator flashes twice.
: VCR / TAPE
3
[NUMBER]
Press
: TV
brand of the component to be preset. The numbers
are shown in the Preset Code Table (vEnd of the
is pressed.
this manual).
GZONE3 modeH
When the code is registered, the signal transmission indicator
flashes twice.
When the preset code is transmitted, the mode indicator for the
component to which that code belongs flashes.
b The input mode is canceled if no button is operated for 10
seconds.
Some brands have more than one preset code. If the component does
not operate, try inputting a different code.
Operating Preset Components
GZONE4 modeH
1
[MODE SELECTOR]
Press
operated.
The mode indicator of the device to be operated flashes.
2
Operate the component.
b For details, refer to the component's operating instructions.
for the device you want to
[RC SETUP]
for at least 3 seconds.
and input the 5-digit number of the
for the component to be
Advertisement
Table of Contents
