Room; Dynamic; Restorer; Night Mode - Denon AVP-A1HDE Owner's Manual

Subwoofer
Adjust each subwoofer channel tone.
[Selectable items] Bass
[Variable range] –6dB ~ +6dB
This can be set individually for the separate surround mode other than
PURE DIRECT, DIRECT and Home THX Cinema mode.
d Room EQ
Select room equalizer for current environment.
[Selectable items]
Audyssey
: Optimize frequency response of all speakers.
Audyssey Byp. L/R
: Optimize frequency response of speakers
except front L and R speakers.
Audyssey Flat
: Optimize frequency response of all speakers to
flat response.
Manual
: Apply frequency response set with "Manual
EQ" (vpage 33).
OFF
: Turn equalizer off.
Operating from the main unit or main remote
control unit
ROOM EQ
Press the button on the main unit or the
main remote control.
Audyssey Audyssey Audyssey Byp. L/R
OFF OFF Audyssey Byp. L/R
Manual Manual Audyssey Flat Audyssey Flat
When "Audyssey" is selected, " " lights.
When "Audyssey Byp. L/R" or "Audyssey Flat" is selected, or when
the auto setup measuring results have changed, "
• "Audyssey" , "Audyssey Byp. L/R" and "Audyssey Flat" can be
selected after the auto setup procedure has been performed.
• If the settings of the speakers for which "None" has been determined
at "Auto Setup" are changed, "Audyssey" , "Audyssey Byp. L/R" and
"Audyssey Flat" cannot be selected and measurements have to be
taken again to include the newly-added speakers.
• When using headphones, "Room EQ" is always set to "OFF" .
f Dynamic EQ
Make Dynamic EQ settings.
[Selectable items]
Operating from the main unit
DYNAMIC EQ
Press the button.
• "Dynamic EQ" is displayed when selecting "Audyssey" , "Audyssey
Flat" or "Audyssey Byp.L/R" in the "Room EQ" setup. When set to
"ON" , the " " indicator is lit.
• When the audio setup measuring results have changed, "
lights.
g RESTORER
This function restores compressed audio signals to how they
EQ
button on the
were before compression and corrects the sense of volume of
the bass and treble to obtain richer playback sound.
[Selectable items]
OFF
Mode1

(RESTORER 64)

" lights.
Mode2
(RESTORER 96)
Mode3
(RESTORER HQ)
The default setting for "NET/USB" and "iPod" is "Mode3" . All others
are set to "OFF" .
ON OFF
"
Operating from the main unit or main remote
control unit
RESTORER
During playback, press the button on the main unit or the
RSTR
button on the main remote control unit.
When set to something other than "OFF" , "
Mode 1
OFF
(RESTORER 64)
Mode 3
(RESTORER HQ)
About the RESTORER function
• Such compressed audio formats as MP3, WMA (Windows Media
Audio) and MPEG-4 AAC reduce the amount of data by eliminating
signal components that are hard for the human ear to hear. The
RESTORER function generates the signals eliminated upon
compression, restoring the sound to conditions near those of the
original sound before compression. It also corrects the sense of
volume of the bass to obtain richer sound with compressed audio
signals.
• This is displayed on the GUI menu and can be set when the input
source is set to "NET/USB" , or when analog signals or PCM signals
(fs = 44.1/48 kHz) are input.
h Night Mode
Optimized setting for late-night listening.
[Selectable items] OFF Low Middle
Operating from the main unit or main remote
control unit
NIGHT
Press the button on the main unit or the
main remote control unit.
The " " indicator lights when "Low" , "Middle" or "High" is
selected.
OFF Low
High
" is displayed.
Mode 2
(RESTORER 96)
High
NGT
button on the
Middle