Adjusting The Volume - Denon PMA-30 Owner's Manual

Contents Connections

Adjusting the volume

1
Use VOLUME df to adjust the volume.
The volume level appears on the display.
0 You can also adjust the volume by turning the volume control knob on the main
unit.
0 You can adjust the volume level to --- dB (mute) and between -90 dB and 0 dB.
Turning off the sound temporarily
(Muting)
1
Press :.
"MUTING" appears on the display.
0 Press : again to cancel the muting.
Front panel Display
Playback Settings
Switching the display's brightness
The display brightness can be adjusted between three levels.
1
Press DIMMER.
0 The DIMMER button also controls the Denon's CD Player DCD-50, so the DCD-50
can be operated simultaneously with this unit. When the two units have different
settings, press and hold in the button for lease 2 seconds to reset them both to the
default setting, then make the desired setting.
0 The display brightness is set to most brightly by default.
27
Rear panel
Tips
The brightness of the display switches each time the button is
0
pressed.
Remote Index
Appendix