Loading Transparencies In Trays 1-4 - Xerox D95 User Manual

5. Load and align the edge of the pre-drilled paper against the LEFT edge of the tray.
Align the paper so that the holes are against the left edge of the tray, and ensure
that the paper is loaded in the LEF direction.
6. Adjust the paper guides by pressing in the guide release and carefully moving the
Edge Guide until it lightly touches the edge of the material in the tray.
Do not load materials above the MAX line located on the rear Edge Guide.
7. Gently push in the tray until it comes to a stop.
If enabled by your System Administrator, the Paper Tray settings screen may be
displayed on the UI.
8. If changes have been made to the paper tray, select the Change Settings button;
otherwise, proceed to the next step.
a) Make the desired selections for Paper Type/Paper Weight, Paper Size, and Paper
Color.
b) If necessary, make the desired changes to paper curl and alignment adjustment.
Note
Refer to the System Administration Guide for detailed information on the paper
curl and alignment adjustment options.
c) Select Save until you are returned to the tray settings window.
9. Select Confirm to close the window.

Loading transparencies in trays 1-4

1. Select the appropriate paper stock for your print job.
2. Pull out the tray slowly until it stops.
3. Fan the transparencies to stop them from sticking together before loading into the
tray.
4. Load transparencies on top of a small stack of same-size paper, and align the edge
of the transparencies with the removable stripe against the LEFT edge of the tray
with the side to be copied or printed on facing down.
Note
Do not load more than 100 transparencies in a paper tray at one time.
Transparencies can be loaded either long edge or short edge feed (portrait or
landscape).
Do not load transparencies above the MAX line as indicated on the tray.
5. When loading transparencies into either Tray 3 or 4, adjust the paper guides until
they lightly touch the edges of the material in the tray.
6. Gently push in the tray until it comes to a stop.
If enabled by your System Administrator, the Paper Tray settings screen may be
displayed on the UI.
7. If changes have been made to the paper tray, select the Change Settings button;
otherwise, proceed to the next step.
Xerox ® D95/D110/D125/D136 Copier/Printer
User Guide
Paper and other media
3-5