Xerox D95 User Manual page 263

Remedy: Power off the machine (print engine), then power on. If problem continues,
contact the Customer Support Center.
048-315
Cause: Interface Module/Interface Cooling Module decurler sensor or belt problem
Remedy: Power off the machine (print engine), then power on. If problem continues,
contact the Customer Support Center.
048-316
Cause: Interface Module/Interface Cooling Module decurler sensor or belt problem
Remedy: Power off the machine (print engine), then power on. If problem continues,
contact the Customer Support Center.
048-317
Cause: Interface Module/Interface Cooling Module cooling fan failure
Remedy: Power off the machine (print engine), then power on. If problem continues,
contact the Customer Support Center.
048-318
Cause: Interface Module/Interface Cooling Module cooling fan failure
Remedy: Power off the machine (print engine), then power on. If problem continues,
contact the Customer Support Center.
048-319
Cause: Interface Module/Interface Cooling Module cooling fan failure
Remedy: Power off the machine (print engine), then power on. If problem continues,
contact the Customer Support Center.
048-320
Cause: Interface Module/Interface Cooling Module communication failure or
connection failure
Remedy: Perform the following:
Check the connection between the Interface Module/Interface Cooling Module and
the connected finishing device or devices.
Fully clear any jams between the Interface Module/Interface Cooling Module and
the connection finishing device or devices.
Ensure all jam clearance handles/levers are returned to their closed positions.
After clearing all jams, remove any ejected paper from the finishing output area.
Power Off/On the machine.
048-321
Cause: Interface Module/Interface Cooling Module communication failure or
connection failure
Remedy: Perform the following:
Xerox ® D95/D110/D125/D136 Copier/Printer
User Guide
Interface Module/Interface Cooling Module
19-11