Xerox D95 User Manual page 264

Interface Module/Interface Cooling Module
Check the connection between the Interface Module/Interface Cooling Module and
the connected finishing device or devices.
Fully clear any jams between the Interface Module/Interface Cooling Module and
the connection finishing device or devices.
Ensure all jam clearance handles/levers are returned to their closed positions.
After clearing all jams, remove any ejected paper from the finishing output area.
Power Off/On the machine.
048-322
Cause: Interface Module/Interface Cooling Module communication failure or
connection failure
Remedy: Perform the following:
Check the connection between the Interface Module/Interface Cooling Module and
the connected finishing device or devices.
Fully clear any jams between the Interface Module/Interface Cooling Module and
the connection finishing device or devices.
Ensure all jam clearance handles/levers are returned to their closed positions.
After clearing all jams, remove any ejected paper from the finishing output area.
Power Off/On the machine.
048-324
Cause: Interface Module/Interface Cooling Module communication failure or
connection failure
Remedy: Perform the following:
Check the connection between the Interface Module/Interface Cooling Module and
the connected finishing device or devices.
Fully clear any jams between the Interface Module/Interface Cooling Module and
the connection finishing device or devices.
Ensure all jam clearance handles/levers are returned to their closed positions.
After clearing all jams, remove any ejected paper from the finishing output area.
Power Off/On the machine.
048-325
Cause: Interface Module/Interface Cooling Module communication failure or
connection failure
Remedy: Perform the following:
Check the connection between the Interface Module/Interface Cooling Module and
the connected finishing device or devices.
Fully clear any jams between the Interface Module/Interface Cooling Module and
the connection finishing device or devices.
Ensure all jam clearance handles/levers are returned to their closed positions.
After clearing all jams, remove any ejected paper from the finishing output area.
19-12 User Guide