31.4 The Add Trust Domain Screen
Use this screen to configure a public IP address which is allowed to access the Device. Click the Add
Trust Domain button in the Maintenance > Remote MGMT > Turst Domain screen to open the
following screen.
Figure 171 Maintenance > Remote MGMT > Trust Domain > Add Trust Domain
The following table describes the fields in this screen.
Table 141 Maintenance > Remote MGMT > Trust Domain > Add Trust Domain
LABEL
IPv4 Address
Apply
Cancel
VMG8324-B10A / VMG8324-B30A Series User's Guide
DESCRIPTION
Enter a public IPv4 IP address which is allowed to access the service on the Device from the
WAN.
Click Apply to save your changes back to the Device.
Click Cancel to restore your previously saved settings.
Chapter 31 Remote Management
293