The Reboot Screen - ZyXEL Communications VMG8324-B10A series User Manual

Reset to Factory Defaults
Click the Reset button to clear all user-entered configuration information and return the Device to
its factory defaults. The following warning screen appears.
Figure 188 Reset Warning Message
Figure 189 Reset In Process Message
You can also press the RESET button on the rear panel to reset the factory defaults of your Device.
Refer to Section 1.6 on page 22

39.3 The Reboot Screen

System restart allows you to reboot the Device remotely without turning the power off. You may
need to do this if the Device hangs, for example.
Click Maintenance > Reboot. Click Reboot to have the Device reboot. This does not affect the
Device's configuration.
Figure 190 Maintenance > Reboot
VMG8324-B10A / VMG8324-B30A Series User's Guide
for more information on the RESET button.
Chapter 39 Configuration
315