Navigation Panel - ZyXEL Communications VMG8324-B10A series User Manual

2.2.3 Navigation Panel

Use the menu items on the navigation panel to open screens to configure Device features. The
following tables describe each menu item.
Table 3 Navigation Panel Summary
LINK
Connection Status
Network Setting
Broadband
Wireless
Home
Networking
VMG8324-B10A / VMG8324-B30A Series User's Guide
TAB FUNCTION
This screen shows the network status of the Device and computers/
devices connected to it.
Broadband Use this screen to view and configure ISP parameters, WAN IP
address assignment, and other advanced properties. You can also
add new WAN connections.
3G Backup Use this screen to configure 3G WAN connection.
Advanced Use this screen to enable or disable PTM over ADSL, Annex M/Annex
J, and DSL PhyR functions.
802.1x Use this screen to view and configure the IEEE 802.1x settings on the
Device.
Wan Status Use this screen to view historical traffic transmission statistics of a
WAN interface.
General Use this screen to configure the wireless LAN settings and WLAN
authentication/security settings.
More AP Use this screen to configure multiple BSSs on the Device.
MAC Use this screen to block or allow wireless traffic from wireless devices
Authentication of certain SSIDs and MAC addresses to the Device.
WPS Use this screen to configure and view your WPS (Wi-Fi Protected
Setup) settings.
WMM Use this screen to enable or disable Wi-Fi MultiMedia (WMM).
WDS Use this screen to set up Wireless Distribution System (WDS) links to
other access points.
Others Use this screen to configure advanced wireless settings.
Channel Status Use this screen to scan wireless LAN channel noises and view the
results.
LAN Setup Use this screen to configure LAN TCP/IP settings, and other advanced
properties.
Static DHCP Use this screen to assign specific IP addresses to individual MAC
addresses.
UPnP Use this screen to turn UPnP and UPnP NAT-T on or off.
Additional Use this screen to configure IP alias and public static IP.
Subnet
STB Vendor ID Use this screen to have the Device automatically create static DHCP
entries for Set Top Box (STB) devices when they request IP
addresses.
5th Ethernet Use this screen to configure the role of the WAN port. It can be either
port the Ethernet WAN or a LAN port.
LAN VLAN Use this screen to control the VLAN ID and IEEE 802.1p priority tags
of traffic sent out through individual LAN ports.
Wake on Lan Use this screen to remotely turn on a device on the network.
Chapter 2 The Web Configurator
29