Add Mac Address Screen - ZyXEL Communications ARMOR G1 User Manual

for example, 00:A0:C5:00:00:02. You need to know the MAC address of the devices to configure this
screen.
Use this screen to change your NBG6818's MAC filter settings. Click Settings > WiFi > MAC Filter to show
following screen.
Figure 60 Settings > WiFi > MAC Filter
The following table describes the labels in this screen.
Table 34 Settings > WiFi > MAC Filter
LABEL
MAC Filter
Filter Action
MAC Address List (Max Limit : 64)
Add
Apply
Cancel

10.4.1 Add MAC Address Screen

Use this screen to configure the MAC address you want to add to the MAC address list. Click Settings >
WiFi > MAC Filter > Add to show the following screen.
Chapter 10 Wireless LAN
DESCRIPTION
Select to turn on (Enable) or off (Disable) MAC address filtering.
Define the filter action for the list of MAC addresses in the MAC Filter Summary table.
Select Allow to permit access to the NBG6818. MAC addresses not listed will be denied access to
the NBG6818.
Select Deny to block access to the NBG6818. MAC addresses not listed will be allowed to access
the NBG6818.
This field displays the MAC address of the wireless station you want to filter.
Click to configure the MAC address.
Click to delete the MAC address.
Click to add a rule in the MAC Address List.
Click Apply to save your changes back to the NBG6818.
Click Cancel to reload the previous configuration for this screen.
NBG6818 User's Guide
109